Composites One

Share

industrial fiberglass solutions fiberglass reinforced polymer console

Robert Stapleton of Industrial Fiberglass Specialties sprays gel coat onto an FRP console built for use by the U.S. Air Force. Source | CW

Industrial Fiberglass Specialties (IFS, Dayton, Ohio, U.S.) is an old-school fiber-reinforced plastic (FRP) pipe factory. The company has been manufacturing FRP products for more than 40 years and has expertise in a wide range of industrial applications and products.

The shop has been in operation since 1979 and is situated in a building that was once the Bluebird Pie Bakery. Today, the company’s primary business is custom fabricator of products for OEMs and other fabricators that require high technology, specialized resins, and expert tooling and machining capabilities.

IFS manufactures composite pipe and fittings for corrosive industrial service including its Series 5700 piping, a filament-wound, fiberglass/methacrylate-modified epoxy composite pipe. The product is designed to handle highly corrosive and abrasive environments. Applications for the piping include chemical process piping, acid drains, wastewater and sewage systems,  process plant piping, power plant and fly ash piping, water treatment piping, hazardous waste piping and industrial service for severely corrosive liquids.

fiberglass composite industrial pipe

Source | CW

IFS’s mainstay is industrial pipe and pipe fittings, but the company also makes specialty items including such custom industrial products as tanks, apparatus, plating tanks, bath tanks and storage tanks.

The company recently worked on a console for a flight simulator for Alion Science & Technology (Alion, Washington, D.C., U.S.), which developed a monitor for Wright Patterson Air Force Base (Dayton, Ohio). IFS received an order for a total of 22 to 24 consoles for this simulator console over the past year. The console presented a few unique challenges, including intricate cutouts for switches. Previous attempts to create a console for the simulator had proven unable to meet the complex shapes and necessary dimensions.

“[Alion] brought us the console, we looked at it, started building it and then realized that some of the stuff they wanted done for the drill holes and the cutouts was taking a lot of extra time to lay out by hand,” says Robert Stapleton, IFS production supervisor. “So what we did is we made a new mold that gives us everything we needed. [The holes and cutouts are] scribed and drilled on in advance, so when you pull the part out, it’s a much quicker process.”

fiberglass composite console

Source | CW

IFS made a new, two-piece fiberglass mold and produces the part via hand layup. Once the two pieces are trimmed and bonded together, the cutouts and inserts for screws are machined into the part.

Stapleton explains, “We spray down the gel coat, and then we do three layers of material for the hand layup process. Then we pop it apart – there is a top and a bottom mold – and do all the necessary trimming. We then bond the two pieces together and then do all of the cutouts and the inserts for the screws. ... Once we get that done, then we do all of our body work to it. And then I take it over and I paint it.”

Wright Patterson wanted a very specific paint job for the part. The mounting bracket for the console is made of powder-coated aluminum, and the console itself needed to match the matte look of the support mechanism.

“[The customer] wanted Army-type rugged matte black, but powder coat doesn’t normally stick to composite,” says Stapleton. “It took me a couple tries, but I was able to paint it to make it look like it was powder.”

IFS’s approach to fabricating the complicated console shortened the production time from several weeks to under a day. The company is now making two of the products every two weeks for the Air Force.

Precision Board Urethane Tooling Board
Janicki employees laying up a carbon fiber part
Compression Molding
Composites One
ViRTEK IRIS 3D
Wickert Hydraulic Presses
Park Aerospace Corp.
HEATCON Composite Systems
Chem Trend
CW Tech Days Sustainability - Register Today!
Thermwood Corp.
industrial CNC routers

Related Content

Focus on Design

3D-printed CFRP tools for serial production of composite landing flaps

GKN Aerospace Munich and CEAD develop printed tooling with short and continuous fiber that reduces cost and increases sustainability for composites production.

Read More

Digitizing tools for composites production

Alpex Technologies focuses on industrialization, process and part intelligence and biocomposites in its next generation of tooling systems.

Read More

Proper application of semi-permanent mold release systems

Performing regular maintenance of the layup tool for successful sealing and release is required to reduce the risk of part adherence.

Read More
Molds/Tools

Metal AM advances in composite tooling, Part 1

Multiple metal additive technologies are gaining market acceptance and interest for composite tooling used in processes ranging from short-fiber injection to autoclave-cure prepreg.

Read More

Read Next

Weaving

Corrosion-resistant composite piping over the long haul

Three decades of lessons learned using corrosion-resistant glass fiber-reinforced composites in piping at SABIC’s Netherlands chlorine production plant.

Read More
Filament Winding

From the CW Archives: The tale of the thermoplastic cryotank

In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.

Read More
Pressure Vessels

Composites end markets: Energy (2024)

Composites are used widely in oil/gas, wind and other renewable energy applications. Despite market challenges, growth potential and innovation for composites continue.

Read More
Precision Board Urethane Tooling Board