Vectorply
Published

Connecting composites to steel

Hyconnect combines glass and steel fibers with welding to lightweight structures.

Share

 

Hyconnect produces FAUSST composite to steel joints for hybrid contstruction

 

This blog is a companion piece to my Dec 2019 feature article, “Removing barriers to lightweighting ships with composites”, sharing a few more details and visuals.

HYCONNECT GmbH (Hamburg, Germany) is a startup founded by Dr. Lars Molter, a naval architect and 10-year veteran of the Center of Maritime Technologies (CMT, Hamburg, Germany), an R&D center for the German maritime industry. “The German companies building megayachts and cruise vessels all have the same problem,” says Molter. “Their customers want to add more equipment, another deck, more insulation against noise and temperature or new design features, such as curved shapes and integrated lighting. Even if they can do these designs with aluminum or steel, it is very time- and cost-intensive.”

Meyer Werft steel ship construction in blocks

Ships are typically built in blocks of welded steel components for faster assembly, as shown here. The FAUSST joint system enables large composite wall panels or other structures to be welded into these steel frameworks, offering lightweight construction using current ship production methods. SOURCE | Meyer Werft

 

Issues with adhesive bonding in hybrid structures

Molter and many others can see the benefits that composites can provide for ships, but currently, ships are built in steel.  There are many working to develop all-composite ships, but in the meantime, there is a significant opportunity to reduce ship weight and emissions with a variety of composite components. One issue, however, is how to join them to the ship’s steel framework. “We looked at bonding,” he explains, “but there isn’t a standardized joint design you can use in all ships and there are no general rules on how to apply adhesive bonding in SOLAS.”

The Safety Of Life At Sea (SOLAS) regulations, issued by the International Maritime Organization (IMO, London, U.K.), required that commercial ships be built in steel until 2002, when MSC/Circ. 1002 was issued, permitting alternative designs. These alternatives, however, require a risk analysis to be performed, showing that the alternative design and construction is equivalent to steel — a process which is long, expensive and bespoke for each vessel built.

 “We asked DNV GL what they would approve for dissimilar-material joints,” says Molter. “They said primary structure would typically require a mechanical attachment; pure bonding would not be certified easily without redundant fasteners.” These issues with bespoke certification and regulatory authority requirement for redundant fasteners vs. purely bonded primary structures are identically present in commercial aircraft. “Also, with bonding, you must control the environment and the process,” he says, noting this is difficult amid the welding and cutting which typically dominate shipyard construction.

 

FAUSST joints

FAUSST glass fiber and steel fiber hybrid fabric

FAUSST hybrid fabric combining glass fiber and steel fiber. SOURCE | Hyconnet

“So, we needed a no-bond solution but with a mechanical attachment,” saysMolter. “We kept wondering how do we connect fibers to metal?” CMT would answer that in the German-funded FAUSST (Fiber and Steel Standard joint) project, which developed, in cooperation with Fritz Moll Tex­tilwerke (Altshausen, Germany), a hybrid warp knitted textile that transitions from 100% glass fibers to 100% steel fibers. 

The fabric architecture is designed so that the steel and glass fibers meander and overlap, which achieves load transfer due to friction as well as interlocking at the crossing points. This architecture also balances knitted fabric for mechanical interlocking with unidirectional fibers for carrying load through the joint. The fabric is produced with an electronically controlled knitting machine at speeds of up to 100 meters/hour.

The next step is to attach this to a metal connector, which could be a plate or hollow profile. The steel fibers are welded to the connector using resistance seam welding (press welding) with a large copper electrode wheel. Molter explains this is like spot welding in automotive but adapted to produce a long, continuous seam. This process enables efficient production of FAUSST connectors with one or several layers of fabric using a robust and well-known process.

Hyconnect seam welding FAUSST fabric to steel connectors

Hyconnect uses seam welding to join FAUSST fabric to steel connectors. SOURCE | Hyconnect.

 

This is what HYCONNECT sells: the fabric welded to a steel connector. “A shipyard or its composite structures supplier decides to use our joint system,” Molter explains. “They specify the joint load and type of steel connector and we then design and produce the FAUSST joint. This is what we deliver and they then infuse that into their composite structures and the shipyard then welds these into the ship’s steel framework.”

 

Managing stiffness and CTE mismatch

There is a stiffness mismatch between the steel fibers and glass fibers in the FAUSST hybrid fabric. Molter explains this is mitigated somewhat by the way the fabric is manufactured, “using 5-7 plies where yarns are interlocked, and we vary how far the steel fibers extend into the glass fiber fabric. You don’t want big peaks in load transfer. We can modify the stiffness by modifying these layers and their constituent fibers, for example, the percentage and direction of glass fiber, etc.” Additional ± 45° fibers can be added to handle higher shear stress and also helps to manage the different coefficients of thermal expansion (CTE) between the steel connector and glass fiber composite. “We can also design for higher loads or special constructions by reinforcing through the thickness using tufted fibers,” Molter explains.

Thickness mismatch between the steel connector and the fiber reinforced plastic (FRP) must also be addressed. “The neutral axis of both materials must be aligned,” says Molter. “This is typically achieved by machining the edge of the steel connector to a 30° taper, creating, in effect, a taper joint for efficient load transfer to the FRP.”

Hyconnect designs and produces FAUSST joints, which are then infused into composite structures and, finally, welded into a ship’s steel framework. SOURCE | Hyconnect.

 

Developing a standardized joint system

Molter left CMT and founded HYCONNECT in 2018 to commercialize the FAUSST joint technology. The company has worked with a variety of industry partners and regulatory authorities to perform testing and iterate joint designs. The goal is to develop a “family” of FAUSST joint products. “There is a linear increase in load-carrying capability by applying more layers of FAUSST fabric,” Molter explains. “So, a base product could be four layers of FAUSST with a 1-meter flat bar welded to it, rated for a certain tensile and bending load. Then there would be some products available to the left, using two or three layers for a lower load rating, and some to the right, such as five or six layers for a higher load rating. We are still finalizing these details, but the goal is a standardized, easy-to-use system.”

Hyconnect testing shows joint with 4 FAUSST layers provides 217 kN/m strength

Hyconnect testing of joints comprising four layers of FAUSST fabric provide 217 kN/M liner joint strength. SOURCE | Hyconnect.

 

Mechanical characterization of the FAUSST joint products are still in progress, but Molter points out they are competitive with adhesive joints. “They also allow 100% inspection using ultrasound or X-ray testing of the weld,” he adds. Prototypes are currently being produced for selected customers and will scale up in 2020.

Meanwhile, HYCONNECT has also had interest from automotive companies and manufacturers interested in rail applications. “There is potential to use this technology for metal inserts and we also see possible applications in building construction,” says Molter. “More and more industries see the value of hybrid structures and the possibility for short assembly times using pre-outfitted semi-finished products.”

Composites One
Custom Quantity Composite Repair Materials
performance composite reinforcements
Toray public database prepreg materials
Toray Advanced Composites
BARRDAY PREPREG
3D industrial laser projection
Renegade Material Composites
Harper International Carbon Fiber
CAMX 2024
HEATCON Composite Systems
Carbon Fiber 2024

Related Content

Out of Autoclave

Welding thermoplastic composites

Multiple methods advance toward faster robotic welds using new technology for increased volumes and larger aerostructures.

Read More
Filament Winding

The first commercial Type V composite pressure vessel

Composites Technology Development's first commercial tank in the Type V category presages growth of filament winding in storage of compressed gases.

Read More
Aerospace

Sustainable, inline recycling of carbon fiber

Shocker Composites and R&M International are developing a supply chain for recycled CF with zero knockdown vs. virgin fiber, lower cost and, eventually, lengths delivering structural properties close to continuous fiber.

Read More
Weaving

Materials & Processes: Fabrication methods

There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.

Read More

Read Next

Filament Winding

From the CW Archives: The tale of the thermoplastic cryotank

In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.

Read More
Pressure Vessels

Composites end markets: Energy (2024)

Composites are used widely in oil/gas, wind and other renewable energy applications. Despite market challenges, growth potential and innovation for composites continue.

Read More
Trends

CW’s 2024 Top Shops survey offers new approach to benchmarking

Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.

Read More
Vectorply