Diving deeper into composite processes
CW recently had the opportunity to visit Abaris Training (Reno, Nev., U.S.), a company that has offered advanced composite training courses for more than 30 years.
Abaris Training in Reno, Nevada, U.S. Source | CW
I have a second job. I’m a martial arts instructor and spend a lot of time thinking about the best ways to work with students to fine-tune details in their technique. I often see students reach a level of understanding and find themselves stuck, not really growing or making new progress. At this point, breakthroughs and improvements usually happen after completely dissecting something the student already thinks they know and starting over at the beginning with an open, receptive mind — a concept that in my training we call “beginner’s mind.”
Abaris instructors Mike Meringolo and Dave Castellar demonstrate vacuum bagging. Source | CW
I recently had an opportunity to visit Abaris Training (Reno, Nev., U.S.), a company that has offered advanced composite training courses for more than 30 years. I visited Abaris not as a student, but as an editor working on a video project for CompositesWorld (more about that at a later date), but to the instructors at Abaris, it was really all the same. Instructors Dave Castellar and Mike Meringolo were encouraging and patient as they walked us through various aspects of composites layup and repair. I made connections between concepts that I had an initial understanding of but hadn’t seen really thought through and experimented with in the real world. Dave and Mike experimented with layups, vacuum bagging configurations and repairs and did an amazing job of explaining the work they were doing and why. Their expert instruction gets to the heart of why things are done a certain way and what kinds of decisions and choices need to be made based on the situation at hand.
CW senior editor Scott Francis and editor-in-chief Jeff Sloan explore vacuum bagging complex parts. Source | CW
The CW team had an awesome week at Abaris. We learned a lot and had a lot of fun doing it. It was time well spent and I’m excited to say that I’m headed back later in April to take the “Advanced Composite Structures: Fabrication & Damage Repair – Phase 1” course, and report on my experiences there.
I’m coming up on my 2-year anniversary with CompositesWorld and it’s been an exciting couple of years. I came to the job without much knowledge of the composites industry and, aside from a couple of initial crash courses, have been learning as I go, through the stories I report on. Each one helps bring the bigger picture into clearer focus. As I mentioned before, as martial arts teacher, I’ve seen people struggle with certain aspects of something they’re trying to achieve, such as learning a new routine or mastering a particular technique. By approaching the task with an open mind and starting at the beginning they are usually able to overcome the obstacle and reach a new level of understanding.
And I’m looking forward to the opportunity to do just that — to having a chance to approach the material with an open mind as a beginner. I’m thrilled to have an opportunity to get my hands dirty and work with techniques that I’ve only learned about by watching others perform — to have an opportunity to take my understanding of the things I’m reporting on to a new level.
Related Content
Novel dry tape for liquid molded composites
MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.
Read MoreA new era for ceramic matrix composites
CMC is expanding, with new fiber production in Europe, faster processes and higher temperature materials enabling applications for industry, hypersonics and New Space.
Read MoreMaterials & Processes: Fabrication methods
There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.
Read MoreLarge-format 3D printing enables toolless, rapid production for AUVs
Dive Technologies started by 3D printing prototypes of its composite autonomous underwater vehicles, but AM became the solution for customizable, toolless production.
Read MoreRead Next
CW’s 2024 Top Shops survey offers new approach to benchmarking
Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.
Read MoreFrom the CW Archives: The tale of the thermoplastic cryotank
In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.
Read MoreComposites end markets: Energy (2024)
Composites are used widely in oil/gas, wind and other renewable energy applications. Despite market challenges, growth potential and innovation for composites continue.
Read More