Mektech Composites (Hillsdale, NJ, US) is a well-known distributor of phenolic resins. Its founder, Aram Mekjian, has a long history in composites, both with polyester and phenolic resins. After almost a decade as phenolics business manager for BP Chemicals, Mekjian founded Mektech Composites in 1999, distributing phenolic resins for BP Chemicals at that time, and now for Georgia-Pacific Chemicals (Atlanta, GA, US).
The passive reactor shown here is Mekjian’s own patented development. The concept is rather straightforward, with manufacturing facility air entering through the flow inlet valve at bottom and proceeding through the active reactor filtration media above. The reactor uses an oxidizing agent to convert styrene from polyester resin fumes or phenol/formaldehyde from phenolic resin into carbon dioxide and water. The carbon dioxide can be captured through the flow outlet valve at top, and water is collected through the moisture drain valve at bottom.
Mektech Composites has developed a passive reactor which uses oxidizing agent to convert styrene from polyester resin or phenol/formaldehyde from phenolic resin into carbon dioxide and water. SOURCE: Mektech Composites, figure by CW.
“The size of the reactor would vary based on the amount of air flow,” says Mekjian. “The passive reactor shown here is sized for resin infusion processing. For open molding, you would use a larger passive reactor to handle the much larger air flow and collect fumes via a ventilation/exhaust hood.” The oxidizing agent cartridge in the active reactor must be changed periodically based on air flow and VOC concentration, similar to changing air conditioner and refrigerator water system filters.
Mekjian notes that this system is an affordable and efficient solution for a wide variety of composites fabrication businesses. Cartridges cost less than $300, while most custom-built passive reactor units are priced below $2,000 USD, made using stock parts and modular assembly. The test results below illustrate the reactor’s efficiency.
* Hydrex 100 33350 series vinyl ester resin containing 55% styrene.
** Cellobond J2027L phenolic resin containing 10% phenol, 0.8% formaldehyde
SOURCE: Mektech Composites
For more details on this passive reactor as well as information on phenolic resin composites, visit Mektech Composites at CAMX 2017 (Sep 11-14, Orlando, FL, US) in Booth W77.
Lightweight, hard and stable at high temperatures, CMCs are emerging from two decades of study and development into commercial applications.
Spirit AeroSystems actualizes Airbus’ intelligent design for the A350’s center fuselage and front wing spar in Kinston, N.C.
The matrix binds the fiber reinforcement, gives the composite component its shape and determines its surface quality. A composite matrix may be a polymer, ceramic, metal or carbon. Here’s a guide to selection.