Airtech
Published

Designing the ultimate stand-up fishing kayak

Apex Watercraft’s new Tyr carbon fiber/epoxy prototype reimagines the typical kayak design and promises the highest performance possible.

Share

carbon fiber fishing kayak

The carbon fiber/epoxy Tyr fishing kayak promises top-of-the-line performance. Source | Apex Watercraft

Apex Watercraft (Rock Island, Tenn., U.S.) was founded in January 2020 by Eric Jackson, a lifelong kayak competitor and designer. Having competed with high-performance, highly durable carbon fiber kayaks like the 15-pound kayak he raced in the 1992 Olympics, Jackson has set out with his new company to create an all-composite, stand-up fishing kayak that matches the light weight and high performance of racing kayaks with a design that’s simple to use. Despite a few setbacks this spring arising from the start of the coronavirus pandemic, Apex introduced its carbon fiber composite Tyr fishing kayak prototype in June through a Kickstarter campaign.

At its 3,000-square-foot facility on Rock Island outside of Campaign, Tennessee, Apex’s team — a mix of designers, kayak experts and engineers experienced in the composites industry — used CAD software to rethink the design of a stand-up fishing kayak. To achieve the stability needed to stand up while fishing, standard plastic kayaks typically feature a rounded hull designed with holes in the kayak — called scupper holes — to drain off any water that gets into the boat. The Apex team envisioned a planing hull design, meaning the kayak is level with the water on one end to ease entry to the kayak and loading of equipment. A planing hull, Jackson says, is also more stable, reduces draft, enables the kayak to travel faster and is more maneuverable than typical kayak hulls.

infusion for carbon fiber kayak

The Apex Watercraft team — calling themselves the “Apex Party — consists of Russ Emanis, the lead on composites for both R+D and manufacturing, Bob Blair on Hull design, Colton Breeding on small part design and manufacturing as well as plant management, Craig Heflin on accessories and Mark Nordstrom on the seat design. Source | Apex Watercraft

“Because composite parts can be made super stiff with core materials, we were able to create a full planing hull with no scupper holes in it,” Jackson says. He adds, “Plastic kayaks would be too flimsy to hold their shape if they were designed with the hull shape of my Apex watercraft.”

The 12-foot, 10-inch Tyr kayak also features a unique fin design, tracking system, cork decking, more efficient storage design and magnets within the inside walls of the boat for easy storage of scissors, pliers and other metal fishing tools.

Intrinsic to the overall design is the use of fiber-reinforced polymer instead of plastic — a design choice which drives up the price but that adds the stiffness, light weight and durability Apex Watercraft is aiming for.

“While the chance of breaking a carbon fiber kayak and needing repairing is greater than a plastic boat, the overall longevity is typically much longer,” Jackson says. “It can be repaired easily by the owner and doesn’t ‘wear down’ like a plastic boat. Plastic boats that get much use in shallow water simply lose too much plastic over a big enough area to make repairing it impractical for most people. A high impact epoxy/carbon/Innegra kayak is something you can keep around for a long time.”

carbon fiber fishing kayak

The signature Tyr logo is custom airbrushed onto each kayak. Source | Apex Watercraft

Built in March, the first prototype using the new design was cut, hand-laid, and infused with vacuum bagging. The design uses Premium Resin Tech (Port Huron, Mich., U.S.) high-impact infusion epoxy resin and Firestone (Kings Mountain, N.C., U.S.) carbon fiber twill fabric, reinforced with H45 PVC foam core and several configurations of Innegra (Greenville, S.C., U.S.) fiber where required. A protective clear coat is applied and then a custom airbrush team adds finishing touches by hand — making sure to make the carbon fiber pattern stand out.

According to Jackson, the company began making its first production boats in August. For more information, email eric@apexwatercraft.com

Smart Tools that act as Mandrels
Coast-Line Intl
Airtech
Sysenqo high performance materials
HEATCON Composite Systems
CompositesWorld
Keyland Polymer
A manufacturing puzzle
Carbon Fiber 2024
Chem Trend
Thermwood Corp.
CompositesWorld

Related Content

Trends

High-performance, high-detail continuous 3D-printed carbon fiber parts

Since 2014, Mantis Composites has built its customer and R&D capabilities specifically toward design, printing and postprocessing of highly engineered aerospace and defense parts.

Read More
Pultrusion

Automated, continuous processes for high-volume automotive and defense components

Thunder Composite Technologies uses its automated pultrusion, RTM and other processes to produce custom-engineered composite parts for automotive and land defense vehicles.

Read More
Aerospace

SuCoHS project: Advancing composite solutions for parts with high thermal and mechanical loads

New materials, structural concepts and manufacturing using sensors for composites that resist fire, temperature and loads while providing weight and cost savings versus metals.

Read More
Trends

Paris Air Show 2023 highlights

The Paris Air Show, one of the largest aerospace trade shows in the world, returned for the first time since 2019 and proved that the global aviation industry industry is very much alive and kicking.

Read More

Read Next

Weaving

Free-form surfacing optimizes free-style kayak

The 6-ft/1.8m-long Project 54cx kayak, made using aramid and carbon fabric-reinforced composites, weighs only 19 lb/8.6 kg.

Read More
Trends

CW’s 2024 Top Shops survey offers new approach to benchmarking

Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.

Read More
Thermoplastics

From the CW Archives: The tale of the thermoplastic cryotank

In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.

Read More
Airtech International Inc.