CAD/CAM/FEA/Simulation

Exploring the: CAD/CAM/FEA/Simulation Zone

119 Results for: Article

Sort by:
Published: 3/31/2012

Ply placement: Largest laser projection system for wind blade manufacture
Following the recent installation of a 16-projector system for an aircraft fuselage application, Assembly Guidance Systems Inc. (Chelmsford, Mass.) recently delivered what it says is the largest unified laser-projection system of its kind, for wind ...

Published: 2/29/2012

Software enables submarine shipyard’s composites-for-metal effort
When Howaldtswerke-Deutsche Werft GmbH (Kiel, Germany) looked for a software solution to reduce the risk of using composites for a greater range of thicker parts, FiberSIM software from VISTAGY Inc. (Waltham, Mass.) enabled its engineers to develop ...

Published: 2/29/2012

Thermocouple innovation shortens autoclave setup for stringers/frames
ATK Aerospace Structures (Clearfield, Utah) trials a thermocouple system from TE Wire & Cable LLC (Saddle Brook, N.J.) called AccuConnect, which cuts thermocouple setup time from 2.5 hours to 20 minutes.

Published: 11/1/2011

PLM software streamlines robotic cell development
FASTCURVE and FASTTIP, part of FASTSUITE from CENIT (Stuttgart, Germany), have been used successfully by Hyde Group Holdings Ltd. (Cheshire, U.K.) to optimize composite wing manufacturing.

Published: 9/1/2011

Software speeds tape layer production, optimizes precision
the Siemens Aerospace Center of Excellence's (Elk Grove Village, Ill.) developed the Siemens SINUMERIK 840D CNC system speeds production on a large ATL machine at the former Boeing Wichita plant (now Spirit AeroSystems) in Wichita, Kan.

Published: 5/2/2011

Software eases design/build for exotic exercise bike
The Lamiflex Group (Bergamo, Italy) helps Milan, Italy-based design house Luca Schieppati develop the Ciclotte, a striking luxury exercise bicycle made with carbon fiber composites.

Published: 4/1/2011

Water tree: Single complex mold shapes unique composite sculpture
To fabricate a complex design for a lighted sculpture, sculptor Lawrence Argent taps the talents of composites specialists Kreysler and Assoc. (American Canyon, Calif.).

Published: 11/30/2010

Life Cycle Assessment: Are composites "green"?
Methods for calculating the impact composites have on the environment enable data-driven comparisons to traditional materials on a level playing field.

Published: 8/31/2010

Deepsea submersible incorporates composite pressure capsule
Spencer Composites Corp. (Sacramento, Calif.) fabricates the inner carbon/epoxy composite pressure capsule for a submersible deepsea vessel the late Steve Fossett was to take to the depths of the Pacific Ocean's Mariana Trench.

Published: 3/31/2010

Integrated software: Streamlined hull & tool design
Although its reputation was solid, rigid inflatable boat (RIB) builder Planatech (Athens, Greece) recently sought ways to design new composite products and their corresponding tool sets faster, without compromising quality.