You are viewing products related to: Kitting and Cutting

PUBLISHED: 11/1/2006

Machining software update

NCCS (Newport Beach, Calif.), the developer of the NCL multiaxis machining software for aerospace, automotive, and turbo machinery applications, has released the software's latest version, NCL 9.5, emphasizing substantial cycle time savings. Among t...


PUBLISHED: 8/1/2006

Machining Center - 8/1/2006

Methods Machine Tools Inc. (Sudbury, Mass.) is offering a new configuration of the RoboDrill T-21EL DDR 700 V-size vertical machining center. Available with either 10,000-rpm or 24,000-rpm spindles, it employs a direct-drive indexing system that is ...


PUBLISHED: 7/1/2006

3-D Fitting Software

Kotem Technologies (Rochester, N.Y.), recently enhanced to its SmartFit 3D best-fitting and analysis software (currently in use on the Airbus A380; see photo). The software inputs part measurements gathered by common metrology systems and troublesho...


PUBLISHED: 5/1/2006

Drill And Trim Router - 5/1/2006

Cincinnati Machine (Hebron, Ky.) announced that it has expanded its HyperMach Series of High Rail Linear Motor Profilers by adding a drilling and trimming router platform. The new machine reportedly meets the accuracy and high-speed processing deman...


PUBLISHED: 5/1/2006

Robotic Trimmers

Robotic Production Technology (RPT, Auburn Hills, Mich.) and FANUC Robotics America (Rochester Hills, Mich.) recently released six models of the AccuTrim robot, including a FANUC robot, RPT process tooling and a proprietary combination of software f...


PUBLISHED: 5/1/2006

Machining Software

Numerical Control Computer Sciences (Newport Beach, Calif.) has premiered its advanced NCL v9.5 multi-axis machining software. The software offers comprehensive 5-axis simultaneous contouring as well as several new time saving enhancements. New feat...


PUBLISHED: 4/1/2006

Drill And Trim Router

Cincinnati Machine (Hebron, Ky.) announced that it has expanded its HyperMach Series of High Rail Linear Motor Profilers by adding a drilling and trimming router platform. The new machine reportedly meets the accuracy and high-speed processing deman...


PUBLISHED: 4/1/2006

Waterjet Cutters

Flow International (Kent, Wash.) recently launched its WaterjetPRO line of compact waterjet cutting tables. The tables offer dependable, fast and accurate cutting and include features such as a jogging pendant and programmable z-axis. The table is i...


PUBLISHED: 4/1/2006

Tool Detector

MultiCam LP (Dallas/Ft. Worth Airport, Texas) has introduced Automatic Dull Tool Detection capabilities to its line of routers. The added technology enables users to optimize tool life and change tools in the middle of a job, without the need to scr...


PUBLISHED: 2/1/2006

Cutting Technology

Lectra (Marietta, Ga.) has introduced ProSpinTechTexST, a single-ply cutter specially adapted to the production of samples and prototypes, using a wide variety of industrial fabrics. The modular system features new cutting technology and is compatib...


RSS RSS  |  Atom Atom