You are viewing products related to: Curing Technology

PUBLISHED: 2/1/2006

Strip Heaters

Research Inc.'s (Eden Prairie, Minn.) StripIR series of strip heaters use parabolic reflectors to apply heat to narrow areas when forming plastic or curing adhesive. The lamp unit reportedly reaches 90 percent of operating temperature within three s...


PUBLISHED: 2/1/2006

Planetary Mixer

Charles Ross & Son Co. (Hauppauge, N.Y.) has developed a new model of its Ross Double Planetary Mixer (DPM). The device has a half-pint working capacity, which makes it suitable for bench-top research and development of highly viscous materi...


PUBLISHED: 2/1/2006

Bagging System

Prairie Technology Group's (Hutto, Texas) new sprayable, reusable SWORL vacuum-bagging system is reported by users to save time and money, says the company. Made from solvent- and VOC-free, low-odor, one-component, moisture-cure PRSI 108 silicone, t...


PUBLISHED: 4/1/2005

Granite filler

ACS International Inc. (Tucson, Ariz.) has developed Artistone, a new line of cultured granite filler materials specifically formulated for cast applications behind gel coat. The materials offer a high-sheen finish and are suitable for bathroom vani...


PUBLISHED: 4/1/2005

Continuous-casting processor

A new Package System introduced by Gisco Inc. (Darien, Ill.) is expected to give small- and mid-sized cast polymer manufacturers an affordable, automated means to cast and dispense products that previously could be manufactured only by a limited num...


PUBLISHED: 4/1/2004

Cast polymer resin/gel coat

Ashland Composite Polymers (Dublin, Ohio, U.S.A.) introduces two new products to its cast polymer product line: MAXGUARD CG-40-0009 marble clear gel coat contains 40 percent HAP, making it SCAQMD Rule 1162-compliant. Its proprietary polymer, designe...


PUBLISHED: 4/1/2004

Cast polymer materials

AOC LLC (Collierville, Tenn., U.S.A.) introduces three new products for the cast polymer market, which can be used for both cultured marble and onyx vanities, shower pans and other bath fixtures: Vicast A540-DHA-15 casting resin offers improved gree...


PUBLISHED: 10/1/2003

RenInfusion high-temperature epoxy for resin infusion

Huntsman Advanced Materials (formerly Vantico, East Lansing, Mich., U.S.A.) introduces its advanced RenInfusion 8615/Ren 8615 204°C/400°F epoxy, formulated for resin infusion. Its low viscosity (500 cps) and extended 20-hour gel time makes...


RSS RSS  |  Atom Atom