PUBLISHED: 11/12/2019

Bio-derived thermoplastic elastomers designed for overmolding

PolyOne’s reSound OM thermoplastic elastomers, derived from sugarcane, are said to offer hardness levels and performance comparable to standard TPEs.


PUBLISHED: 11/12/2019

Containment system protects against airborne contamination

Hemco Corp.’s CCS Controlled Containment system is designed for use with dispensing and we


PUBLISHED: 11/12/2019

Epoxy toughening agent enhances adhesion for automotive applications

CVC Thermoset Specialties’ HyPox RA875 epoxy adduct toughening agent is said to enable improved peel strength at room temperature and temperatures down to -40°C.


PUBLISHED: 11/12/2019

Foam materials for injection or compression molding

Hexion Inc.’s Bakelite FoamSet materials offer flame retardance for lightweight construction applications.


PUBLISHED: 11/5/2019

CT data drives new level of fiber analysis

Volume Graphics (VG, Charlotte, N.C., U.S.) has launched the latest version of its software solution for rendering data derived from computed tomography (CT) scanning operations.


PUBLISHED: 10/22/2019

Solvay introduces high-temperature PEEK polymer

KetaSpire PEEK XT promises the chemical resistance of standard PEEK plus significantly higher strength and stiffness at elevated temperatures.


PUBLISHED: 10/20/2019

Composite core and sprayable barrier coats

Composite Technologies International has launched its AmeriCore 100% composite core and its Fiber Shield sprayable barrier coat and print blocker.


PUBLISHED: 10/20/2019

Energy saver system lowers vacuum generator power usage, reduces noise

Anver Corp.’s Energy Saver technology is now available to reduce operating costs and increase safety on all of its electric- and air-powered vacuum generators.


PUBLISHED: 10/20/2019

Portable digital PID temperature controller earns cULAS and CE approvals

BriskHeat’s SDX digital PID temperature controller is designed for high accuracy in a portable, tabletop controller.


PUBLISHED: 10/20/2019

Epoxy hardener designed for SMCs in e-mobility applications

Evonik has launched VESTALITE S, an epoxy hardener designed for sheet molding compounds (SMCs) in electric vehicles and other automotive applications.