Through-Spindle Dust Collection For Composites And Graphite
8/22/2008 Modern Machine Shop

A vacuum system for the machining center draws particulate through the center of the tool.

End Mill Comparisons in CFRP, Part 1 - Carbide Tool
8/15/2008 Modern Machine Shop

Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic.

End Mill Comparisons in CFRP, Part 2 - Diamond-Coated Tool
8/14/2008 Modern Machine Shop

Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic.

End Mill Comparisons in CFRP, Part 3 - Conventional PCD Tool
8/13/2008 Modern Machine Shop

Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic.

End Mill Comparisons in CFRP, Part 4 - Veined PCD Tool
8/12/2008 Modern Machine Shop

Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic.

Exit-Side Drill Penetration Without Delamination
8/5/2008 Modern Machine Shop

Slow-motion video shows the effect of a micograin tool coating in drilling CFRP.

Five-Axis Milling And Drilling Of Composite Component
8/5/2008 Modern Machine Shop

This video from machine tool maker CMS shows high speed five-axis milling and drilling of composite component.

Cutting Out A Composite Structure
8/5/2008 Modern Machine Shop

Milling cuts out features of a composite structure, then cuts the structure itself out of the setup.

Five-Axis Trimming Of Composites
8/5/2008 Modern Machine Shop

Here is video of the five-axis motion required to trim a relatively simple composite component.

« Prev | Page 1 of 1 | Next »

RSS