Results: 1 to 10 of 47

Sort By: Posted Date | Source

Type: AllArticleCase Study

Cost- and time-saving preform process used for propeller spinner
2/27/2009

Carbon fiber/epoxy spinner uses pulp slurry preforming process combined with vacuum infusion molding.

Inside R&D: A-VaRTM takes flight in Japan
2/20/2009

Tests show out-of-autoclave process can reduce costs on new regional jet.

Inside Analysis: Simulating VARTM for better infusion
1/1/2008

A resin flow simulation tool is helping to optimize liquid molding of aerospace parts.

Engineering Insights: Pedestrian Bridge Deck Makes Business Case for Composites
12/1/2007

Infusion molded deck incorporates high-performance core, which facilitates fast processing.

Inside Manufacturing: 45,000 Fan Ducts Per Year from RTM
10/1/2007

Unique tooling technology optimizes closed molding process efficiency for volume production of industrial part.

Inside Manufacturing: A400M Cargo Door Out of the Autoclave
5/1/2007

This structural military airframe part is the largest made to date via the vacuum-assisted resin infusion process.

Rudder Gets New Twist With Composites
8/1/2006

The U.S. Navy's specially contoured ship rudder commands composite construction.

Cutting Infusion Time And Cost
8/1/2006

When open molders turn to infusion, careful planning, material selection and training precede process efficiency.

U.K. Firm Debuts Composite Overhead Sign Structures
8/1/2006

The Specialist Structures Group of White Young Green (WYG, Headingley, Leeds, U.K., formerly CETEC Projects Ltd.) and the U.K. Highways Agency are developing a composite solution for motorway overhead sign structures. Ranging from 15m to 50m (49.2 ft to 164 ft) in length, the structures will span the entire roadway

Autoclave Quality Outside The Autoclave?
3/1/2006

Pioneers of out-of-autoclave processing in aerospace applications answer a qualified but enthusiastic Yes!

« Prev | Page 1 of 5 | Next »

RSS