VISTAGY Inc. Showroom

Contact Information

Please visit: www.vistagy.com

Phone: (781) 250-6800
Toll-Free: (800) 847-6905
Fax: (781) 250-6801

Mailing Address:
200 Fifth Ave.

Waltham, MA USA 02451

Engineer Contact: Marcia Cheverie , (781) 250-6881 marcia.cheverie@vistagy.com

Sales Contact: Marcia Cheverie , (781) 250-6881 marcia.cheverie@vistagy.com

Additional Locations:

» Sales Office Blanford Forum , England, United Kingdom +44 1258 858 558

» Stuttgart , Germany +49 771 8977 253

» Asia Pacific Sales Waltham MA , USA (781) 250-6897

Products/Services:
FiberSIM, a suite of CAD-integrated specialized engineering software tools for the design, analysis, tooling and manufacture of composite materials. The software is used in the aerospace, wind energy, marine and high-performance automotive industries. SyncroFIT is a CAD-integrated software for designing and manufacturing aircraft structures and airframes.

Product Categories of VISTAGY Inc.

  • Auxiliary processing equipment, repair equipment, and supplies
    • Auxiliary processing equipment
      • CAD/CAM/CAE hardware/software
      • Computer controls and software
  • Testing, gauging, monitoring, analytical equipment and software
    • Modeling/simulation/virtual testing software
    • Surface analyzers
  • Design, testing, consulting, other services
    • CAD/CAM/CAE design
    • Inspection services
    • Materials analysis
    • Product design
    • Regulatory compliance
    • Other services

Product Announcements

As Seen in Print

Simulation simplifies fabrication of all-composite crew module 10/7/2009
Specialized simulation software shortens development cycle on first all-composite crew module demonstrator for...
JEC COMPOSITES 2009 Product Showcase 6/16/2009
Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surpr...
Build-to-print done better 6/9/2009
Defense contractor’s lean manufacturing strategy meets winglet production goals for in-demand ScanEagle UAV....
JEC Composites 2009 showcase 5/18/2009
Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surpr...
AFP/ATL design-to-manufacture: Bridging the gap 4/21/2009
Managing production of a structure made via fiber or tape placement often requires software-aided  manipulati...
Aircraft simulation gets composites aware 2/23/2009
Rapid software evolution enables faster, better virtual solutions to complex composite design problems....
COMPOSITESWORLD Expo 2008 Showcase 10/20/2008
The inaugural COMPOSITESWORLD Expo Conference and Exhibition draws participants from all segmentsof the indust...
COMPOSITESWORLD EXPO Showcase 10/6/2008
The inaugural COMPOSITESWORLD Expo Conference and Exhibition draws participants from all segments of the indus...
COMPOSITESWORLD Expo Preshow Preview 8/21/2008
CWExpo organizers pull aside the curtain for a sneak preview of the Expo's two keynote speakers and some new p...
Formula 1 team accelerates design-to-track speed 5/1/2008
Race car builder automates manual chassis design phase with unique FEA-to-CAD utility....
JEC Composites 2007 Product Showcase 6/1/2007
This year’s Parisian exhibition provides key evidence of the composites industry’s unprecedented bre...
JEC COMPOSITES 2007 Highlights 5/1/2007
Advanced composites make notable marks not only in traditional aerospace apps, but in automotive, sport and in...
FEA Roundup: Design, Simulation And Analysis Converge 4/1/2007
New modeling and analysis software products increase the accessibility and reliability of finite element analy...
JEC Composites 2006 Product Showcase - 7/1/2006 7/1/2006
Advanced composites continue to lead the economic upswing in the composites industry....
F1 Racing Team Speeds Chassis Design/production With Aerospace Software 1/1/2006
The Renault Formula1 racing team (Enstone, U.K.) builds its car chasses, wings and other components from compo...
Why Microstructure Matters 1/1/2006
Microtesting composite materials speeds seleMicrotesting composite materials speeds selection, allowing design...
Post-show review of the 2004 U.S. SAMPE Symposium 7/1/2004
Largest-ever Symposium serves up a large helping of news and new technologies from advanced composites supplie...
Nacelle manufacturers optimize hand layup and consider closed molding methods 5/1/2004
Focused on optimizing traditional hand layup, nacelle and thrust reverser manufacturers cast an eye on future ...
Airline maintenance facility cuts repair costs while improving part quality 5/1/2004
Delta TechOps uses simulation software to standardize repair procedures and bring work back in-house....
Parts consolidation key to lower cost composites 1/1/2004
Reducing part count creates new engineering challenges....
Fiber Placement The Centerpiece Of NCAM 1/1/2004
Cryogenic composites just one facet of Lockheed Martins National Center for Advanced Manufacturing....
Liquid Composite Molding Achieves Aerospace Quality 11/1/2003
Improvements in materials, tooling and process control bring RTM and VARTM into the realm of aerospace compone...
SAMPE Wrap Up And Product Showcase 7/1/2003
Exhibitions on both sides of the Atlantic spur optimism and spotlight innovative technology....
JEC Composites 2003 SAMPE Europe Conference Review 6/1/2003
Paris is the debut stage for a galaxy of composites industry innovations....