Toho Tenax America Inc. Showroom

Contact Information

Please visit: www.tohotenaxamerica.com

Phone: (865) 354-8408
Toll-Free: (800) 252-3001
Fax: (865) 354-8409

Mailing Address:
121 Cardiff Valley Rd.

Rockwood, TN USA 37854

Sales Contact: Greg Olson , (865) 354-5505 golson@tohotenax-us.com

Engineer Contact: Pete Shpik , (865) 354-5324 pshpik@tohotenax-us.com

Additional Locations:

» Wuppertal , Germany +49 202 3223 38

» Tokyo , Japan +81 358 4236 71

» Irvine CA , USA (949) 474-3278

» Huntersville NC , USA (888) 331-3663

» 2411 Legacy Maple Dr. Braselton GA , USA (770) 329-7667

Products/Services:
Sales and manufacture of trademarked Tenax brand of PAN-based carbon fibers including standard, intermediate and high modulus fibers; chopped and milled fibers and trademarked Pyromex oxidized PAN fibers (OPF). Fibers are manufactured in Japan, Germany and USA.

Product Categories of Toho Tenax America Inc.

  • Materials
    • Fibers, organic
      • Carbon, PAN-based
      • Other organic fibers
    • Fibers, metallized
    • Reinforcements, unimpregnated
      • Aramid
        • Aramid, Chopped strand
        • Aramid, Milled fibers
        • Aramid, Other
      • Aramid/glass hybrid
        • Aramid/glass hybrid, Chopped strand
        • Aramid/glass hybrid, Milled fibers
        • Aramid/glass hybrid, Other
      • C-glass
        • C-glass, Chopped strand
        • C-glass, Milled fibers
        • C-glass, Other
      • Carbon
        • Carbon, Chopped strand
        • Carbon, Milled fibers
        • Carbon, Other
      • Carbon/aramid hybrid
        • Carbon/aramid hybrid, Chopped strand
        • Carbon/aramid hybrid, Milled fibers
        • Carbon/aramid hybrid, Other
      • Carbon/glass hybrid
        • Carbon/glass hybrid, Chopped strand
        • Carbon/glass hybrid, Milled fibers
        • Carbon/glass hybrid, Other
      • Ceramic
        • Ceramic, Chopped strand
        • Ceramic, Milled fibers
        • Ceramic, Other
      • E-Glass
        • E-Glass, Chopped strand
        • E-Glass, Milled fibers
        • E-Glass, Other
      • Structural high-strength glass (S- and R-type)
        • Structural high-strength glass (S- and R-type), Chopped
        • Structural high-strength glass (S- and R-type), Milled
        • Structural high-strength glass (S- and R-type), Other
      • Other unimpregnated reinforcement forms
        • Other, Chopped strand
        • Other, Milled fibers
        • Other, Other
    • Preforms, unimpregnated
      • Carbon

Product Announcements

As Seen in Print

Cost- and time-saving preform process used for propeller spinner 2/27/2009
Carbon fiber/epoxy spinner uses pulp slurry preforming process combined with vacuum infusion molding....
JEC COMPOSITES Show highlights 5/1/2008
The annual gathering in Paris reflects the industry’s confidence that the market’s global growth will continue...
Carbon Fiber 2007 looks forward with optimism 1/1/2008
As high demand confronts a still limited supply, industry insiders and analysts meet to assess carbon fiber&#x...
Paris Air Show review 9/1/2007
The biennial aircraft showcase confirms composites as an established,permanent presence in commercial aircraft...
Carbon Fiber in the Wind 7/1/2007
Is there a market for carbon composites in wind turbine blade construction? Yes, but the real question is, how...
Composite Automotive Crush Structures 4/1/2007
Tests that characterize, isolate and accurately measure energy absorption modes provide auto engineers the dat...
Composite Spoilers Brake Airbus For Landing 7/1/2006
New RTM'd carbon composite center hinge fitting withstands 20-ton air load in commercial jet spoiler assembly....
Composites connect with the world of cabling 2/1/2006
Composite cables prove they can handle high tension - on land, over water and under the sea....
Very Light Jets Creating A Demand For Composites - 1/1/2006 1/1/2006
"Baby" jets are causing an aviation buzz but will the market exist?...
At the top and still climbing 3/1/2005
Trek Bicycles' OCLV manufacturing method shortens cycle times and optimizes compaction in molded carbon fiber-...
An Elegant Solution For A Big Composite Part 5/1/2003
The rear pressure bulkhead for the Airbus A380 employs resin film infusion....