Taricco Corporation Showroom

Contact Information

Please visit: www.taricco.com

Phone: (562) 437-5433
Toll-Free: (800) 425-2837
Fax: (562) 901-3932

Mailing Address:
1500 W. 16th St.

Long Beach, CA USA 90813

Engineer Contact: Sam Spence , (562) 437-5433 spence@taricco.com

Sales Contact: Sam Spence , (562) 437-5433 spence@taricco.com

Products/Services:
Autoclaves, built to A.S.M.E. codes and standards and are National Board registered. Manufactures pressure vessels, composite bonding autoclaves, refinery equipment, and other large-scale ovens and presses.

A Special Message from Taricco Corporation

Autolcaves, Ovens, and Presses

In addition to manufacturing some of the worldâ¬"s largest autoclave and oven systems, domestic and international, we have refurbished our large inventory of used autoclaves for quick shipment. A Taricco Corporation â¬SRefurbished⬝ autoclave is not just a paint job! Our refurbished system have been completely stripped down to bare metal and rebuilt. Some key features are all new wiring (New MCC and PLC hardware, new insulation, new internal ducting and sheet metal, new or rewound fan motors, new or refurbished cooling coils, and more⬦ See our complete listing of these systems online at: http://www.taricco.com/Products/Autoclave.html

Product Categories of Taricco Corporation

  • Primary manufacturing equipment
    • Autoclaves
    • Autoclaves, lab size
    • Autoclaves, software and controls
    • Presses
      • Presses, compression molding
      • Presses, diaphragm forming
      • Presses, hydraulic
      • Presses, laminating
      • Presses, software and controls
      • Presses, superplastic forming
      • Presses, thermoforming/pressure forming
      • Presses, vacuum
    • Resin transfer molding equipment (RTM)
    • Used primary equipment
    • Vacuum-assisted resin transfer molding equipment (VARTM
    • Other primary manufacturing equipment
  • Auxiliary processing equipment, repair equipment, and supplies
    • Auxiliary processing equipment
      • Bonding equipment
      • Computer controls and software
      • Curing ovens/lamp arrays
      • Dust-recovery/odor/ventilation equipment
      • Furnaces
      • Leak detectors
      • Ovens
      • Process controls
      • Solvent recovery equipment
      • Used auxiliary equipment
      • Vacuum storage chambers
    • Composite repair equipment
      • Heater blankets
      • Heaters
      • Hot bonders
      • Repair autoclaves
      • Repair ovens
      • Vacuum/repair tables (heated/unheated)
    • Supplies
      • Vacuum valves and pumps
  • Testing, gauging, monitoring, analytical equipment and software
    • Cure-monitoring equipment
    • Pressure monitoring equipment
    • Temperature monitoring equipment
  • Fabricating services
    • Thermoplastic materials
      • Autoclave cure
      • Resin transfer molding (RTM)
      • Vacuum forming
      • Vacuum-assisted resin transfer molding (VARTM)
    • Thermoset materials
      • Autoclave cure
      • Hand layup
      • Resin transfer molding (RTM)
      • Vacuum forming
      • Vacuum-assisted resin transfer molding (VARTM)
  • Design, testing, consulting, other services
    • Machine calibration services

As Seen in Print

Skinning the F-35 fighter 10/19/2009
Fasteneing the all-composites skin on the Lightning II requires machining and drilling technology that is opti...
Inside Manufacturing: An autoclave for the 787 center wing box 3/1/2007
Development partners overcome cultural and geographical challenges to ensure cure of this massive composite st...
SAMPE 2005 Product Showcase 7/1/2005
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion....
Post-show review of the 2004 U.S. SAMPE Symposium 7/1/2004
Largest-ever Symposium serves up a large helping of news and new technologies from advanced composites supplie...
Improving Autoclave Performance 3/1/2003
Precision process controls optimize quality of autoclave-cured parts....