Quantum Composites Inc. Showroom

Contact Information

Please visit: www.quantumcomposites.com

Phone: (989) 496-2884
Toll-Free: (989) 922-3863
Fax: (989) 922-3915

Mailing Address:
1310 S. Valley Center Dr.

Bay City, MI USA 48706

Sales Contact: Matthew Douglas , (989) 922-3863 x108 mdouglas@quantumcomposites.com

Engineer Contact: Mike Kiesel ,

Products/Services:
Develops and supplies engineered structural composite molding compound for high-performance structural and conductive applications; glass- and carbon-reinforced vinyl esters, polyesters, epoxies and other resin systems. Brand names include Lytex, QC, AMC and Pemtex.

Product Categories of Quantum Composites Inc.

  • Materials
    • Prepregs, thermoset
      • Bismaleimide
        • Bismaleimide, <12K tow
      • Cyanate ester
        • Cyanate ester, <12K tow
      • Epoxy
        • Epoxy, <12K tow
      • Epoxy, 250 F cure
        • Epoxy, 250 F cure, <12K tow
      • Epoxy, 350 F cure
        • Epoxy, 350 F cure, <12K tow
      • Epoxy, toughened
        • Epoxy, toughened, <12K tow
      • Phenolic
        • Phenolic, <12K tow
      • Polyester, unsaturated
        • Polyester, unsaturated, <12K tow
      • Polyimide
        • Polyimide, <12K tow
      • Vinyl ester
        • Vinyl ester, <12K tow
        • Vinyl ester, 12-inch tape
      • Other
        • Other, <12K tow
    • Compounds
      • Bulk molding (BMC)
      • Sheet molding (SMC)

As Seen in Print

Composites fuel growth of fuel cell technology 9/14/2009
Composite components in hydrogen fuel cell systems help handle higher heat and reduce stack size....
Composites ride and support the rails 1/21/2009
Increased ridership and heavier axle loads on rail systems around the world signal a potential boon for compos...
Reinforced Plastics Mold New Niches In Electronics 6/1/2006
For manufacturers and consumers, composites are protecting delicate circuitry and making devices more durable....
Compression molding with structural carbon SMC 1/1/2005
Aircraft weapon system gains the high performance of carbon/epoxy with the efficiency of compression molding....
Corvette gets leaner with carbon fiber hood 3/1/2004
Advances in materials and processing yield high-volume, low-mass hood for GM flagship....
Advances in sizings and surface treatments for carbon fibers 3/1/2004
As carbon reinforcements find new applications, unfamiliar processes and resin systems make sizing and treatme...
Vinyl ester composite parts in boat stern drive resist corrosion and damage 2/1/2004
Volvo Penta's Ocean Series brings vinyl ester composites to the powertrain end of the boat....