National Composite Center Showroom

Contact Information

Please visit: www.compositecenter.org

Phone: (937) 297-9450
Toll-Free:
Fax: (937) 297-9440

Mailing Address:
2000 Composite Dr.

Kettering, OH USA 45420

Sales Contact: Alan Fatz , (937) 297-9461 afatz@compositecenter.org

Engineer Contact: Lisa Novelli , (937) 297-9440 lnovelli@compositecenter.org

Products/Services:
A commercialization agent for advanced materials and a comprehensive resource for capabilities, including design optimization, Rapid Fiber Preforming and Large Scale Preforming, closed molding, long fiber-reinforced thermoplastics (LFRTs), Litecast and nanocomposites. Can take concepts to production-ready parts quickly.

Product Categories of National Composite Center

  • Materials
    • Preforms, unimpregnated
      • Chopped fiber
  • Tools/tooling materials
    • Tools
      • Composite
        • Composite, fiberglass
        • Composite, other
      • Prototype
    • Tooling materials and supplies
      • Clay, modeling
  • Fabricating services
    • Thermoplastic materials
      • Compression molding
    • Thermoset materials
      • Coating and painting
      • Compression molding
      • Fiber placement
      • Filament winding
      • Hand layup
      • Pressure forming
      • Prototyping
      • Pullwinding
      • Pultrusion
      • Reaction injection molding (RIM)
      • Resin transfer molding (RTM)
      • Sprayup
      • Structural reaction injection molding (SRIM)
      • Vacuum-assisted resin transfer molding (VARTM)
  • Design, testing, consulting, other services
    • Consulting
      • Consulting, materials
      • Consulting, process development
    • Education/Training
    • Inspection services
    • Testing
      • Testing, materials
      • Testing, product

As Seen in Print

Optimizing the performance of C/C brakes 10/19/2009
Renowned architect Mies van der Rohe once observed about the nuances of building design, “God is in the detail...
CompositesWorld Expo 2009 Highlights 10/16/2009
Despite a gloomy economy, dozens of exhibitors and a motivated group of knowledge-hungry conference/show atten...
Resin systems update: The greening of thermosets 3/25/2009
Thermoset resin formulators seek environmental benefits as customers demand reduced cost and increased perform...
Integrated drop-in-place superstructure the solution for Eight Mile Bridge 12/2/2008
...
COMPOSITESWORLD EXPO Showcase 10/6/2008
The inaugural COMPOSITESWORLD Expo Conference and Exhibition draws participants from all segments of the indus...
High-Volume Preforming for Automotive Application 10/6/2008
More than a dozen parts for four Aston Martin models are mass produced in France using Ford Motor Co.'s optimi...
Building Bridges to Bridge and Building Rehab Markets 4/1/2008
Despite a lack of standardization and education in the civil construction sector, these innovators use carbon ...
Inside Manufacturing: Thermoplastic Composites Lighten Transit Bus 2/1/2008
Low-pressure forming processes and low-density, long fiber-reinforced thermoplastic come together to cut weigh...
Engineering Insights: Pedestrian Bridge Deck Makes Business Case for Composites 12/1/2007
Infusion molded deck incorporates high-performance core, which facilitates fast processing....
Rapid Fiber Preforming On A Large Scale 4/1/2006
A proven alternative to open molding of big parts....
PZTs energize active composites 7/1/2005
NCC/ACI partnership to commercialize flexible lead zirconate titanate piezoelectric fibers in self-powered and...