Henkel Corporation Showroom : COMPOSITESWORLD.com

Contact Information

Phone: (860) 571-5100
Toll-Free:
Fax: (860) 571-5465

Mailing Address:
1001 Trout Brook Crossing

Rocky Hill, CT USA 06067-3910

Engineer Contact: Pat Malanaphy , (860) 571-5334 pat.malanaphy@us.henkel.com

Sales Contact: Jay Reddy , (860) 571-5108 jay.reddy@us.henkel.com

Products/Services:
Frekote mold releases. and Hysol structural film and paste adhesives are used for composite, metal and honeycomb assembly applications.

A Special Message from Henkel Corporation

Product Categories of Henkel Corporation

Materials
- Adhesives
  - Acrylic
    - Acrylic, Hot melt
    - Acrylic, Paste
  - Bismaleimide
    - Bismaleimide, Hot melt
    - Bismaleimide, Paste
  - Cyanoacrylate
    - Cyanoacrylate, Hot melt
    - Cyanoacrylate, Paste
  - Epoxy
    - Epoxy, Hot melt
    - Epoxy, Paste
  - Nylon
    - Nylon, Hot melt
    - Nylon, Paste
  - Phenolic
    - Phenolic, Hot melt
    - Phenolic, Paste
  - Polyimide
    - Polyimide, Hot melt
    - Polyimide, Paste
  - Silicone
    - Silicone, Hot melt
    - Silicone, Paste
  - Urethane
    - Urethane, Hot melt
    - Urethane, Paste
  - Other
    - Other, Hot melt
    - Other, Paste
- Casting resins
  - Epoxy
- Resin additives & modifiers
  - Ablatives
  - Nanomaterials (carbon nanotubes, fullerenes, etc.)
Tools/tooling materials
- Tooling materials and supplies
  - Mold cleaners
  - Mold release films
  - Mold release films, for prepreg
  - Mold releases
    - Mold releases, liquid external
    - Mold releases, sprays
Auxiliary processing equipment, repair equipment, and supplies
- Auxiliary processing equipment
  - Adhesive applicators
  - Bonding equipment
- Supplies
  - Filler paste
  - Film and sheet
  - Paint strippers for composites
  - Peel plies
  - Shim materials
Composite Structures & Components
- Other composite structures

Product Announcements

Mold cleaners, releases - 11/1/2007 - 11/1/2007

As Seen in Print

SAMPE 2009 Product Showcase 6/16/2009: Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor...
Solvent-free release a good match for wind blade molding 5/21/2009: ...
COMPOSITES+POLYCON 2009 Showcase 3/27/2009: Despite the deepening recession, composites pros returned to the show in its new time slot to explore the weal...
The matrix 1/8/2009: The matrix matieral binds the fiber reinforcment and gives the composite component its shape and determines th...
COMPOSITES & POLYCON 2009 preview 12/1/2008: The ACMA’s annual tradeshow takes its first turn in its new January timeframe....
FRP forms enable fluted concrete column design 10/6/2008: The Century Project, a 42-story luxury condominium tower in Los Angeles, Calif. , designed by Robert A. M....
Composites Polycon 2007 Showcase 12/1/2007: Tampa show attendance is up despite slow economy. ACMA reschedules 2008 show....
Inside Manufacturing: All-carbon composite stealth technology joins the U.S. Navy 9/1/2007: Unique double-M hull design creates smooth air cushion for low-wake, low-weight, low-draft ship....
Bonding Technology: Thermosetting Structural Adhesives 6/1/2007: A wealth of epoxies, polyurethanes and acrylics speed assembly and cut manufacturing cost in an ever-wider ran...
Carbon fiber raises consumer performance index 1/1/2005: Carbon bridges gap between large-volume sporting goods and aerospace to satisfy discriminating tastes in consu...
Post-show review of the 2004 U.S. SAMPE Symposium 7/1/2004: Largest-ever Symposium serves up a large helping of news and new technologies from advanced composites supplie...
SparrowHawk all-carbon composite sailplane 7/1/2004: The first-ever all-carbon composite sailplane yields unprecedented maneuverability and top performance....
Newer surfacing films reduce surface on demolded composite parts 5/1/2004: A wide variety of products reduces finishing costs in many applications....