Suppliers

Glass Fiber Technology Co. Ltd.

Raw materials and processing technologies for the composites industry (e.g., filament winding, RTM, sprayup and hand layup). Solid surface, cultured marble and construction.



Phone: +966-2-6217251
Toll-Free: 9200 200 83
Fax: +966-2-6217257

Please visit: Glass Fiber Technology Co. Ltd.

Mailing Address
Jeddah, Gawiza District
PO Box 110290
Jeddah, 21361 SA

Additional Locations:
Second Industrial Area - Al-kHarg old St.
Riyadh, SA
+966 1 2132052

Dallah Industrial Area
Dammam, SA
+966 3 8187332

 
SPECIAL MESSAGE
PRODUCT CATEGORIES
Materials
  • Matrix resins, thermoplastic
    • Polyester (PET)
    • Polystyrene
    • Polyurethane
    • Styrene monomer (diluent)
  • Matrix resins, thermoset
    • Vinyl ester
    • Unsaturated polyester
      • Unsaturated polyester, bisphenol A fumerate
      • Unsaturated polyester, DCPD-modified
      • Unsaturated polyester, fire-retardant
      • Unsaturated polyester, isophthalic
      • Unsaturated polyester, low-VOC/no VOC
      • Unsaturated polyester, orthophthalic
      • Unsaturated polyester, terephthalic
  • Fibers, inorganic
    • C-Glass
    • E-Glass
    • Structural high-strength glass (S- and R-type)
  • Fibers, organic
    • Polyester
  • Reinforcements, unimpregnated
    • C-glass
      • C-glass, Chopped strand
      • C-glass, Combination woven roving & chopped strand mat
      • C-glass, Mat, chopped strand
      • C-glass, Mat, continuous strand
      • C-glass, Milled fibers
      • C-glass, Roving, gun
      • C-glass, Roving, multi-end
      • C-glass, Roving, panel
      • C-glass, Roving, single-end direct
      • C-glass, Surfacing veil
      • C-glass, Yarns
      • C-glass, Other
    • E-Glass
      • E-Glass, Chopped strand
      • E-Glass, Combination woven roving & chopped strand mat
      • E-Glass, Mat, chopped strand
      • E-Glass, Mat, continuous strand
      • E-Glass, Milled fibers
      • E-Glass, Roving, gun
      • E-Glass, Roving, multi-end
      • E-Glass, Roving, panel
      • E-Glass, Roving, single-end direct
      • E-Glass, Surfacing veil
      • E-Glass, Yarns
      • E-Glass, Other
    • Other unimpregnated reinforcement forms
      • Other, Chopped strand
      • Other, Combination woven roving & chopped strand mat
      • Other, Mat, chopped strand
      • Other, Roving, gun
      • Other, Roving, multi-end
      • Other, Roving, single-end direct
  • Fabrics, unimpregnated
    • Aramid
      • Aramid, Other
    • C-glass
      • C-glass, 4-harness (crowsfoot)
      • C-glass, 5-harness
      • C-glass, 8-harness
      • C-glass, Basket-weave
      • C-glass, Braided
      • C-glass, Multiaxial
      • C-glass, Plain-weave
      • C-glass, Stitched (knitted, nonwoven)
      • C-glass, Twill
      • C-glass, Woven roving
      • C-glass, Other
    • E-Glass
      • E-Glass, 4-harness (crowsfoot)
      • E-Glass, 5-harness
      • E-Glass, 8-harness
      • E-Glass, Basket-weave
      • E-Glass, Braided
      • E-Glass, Multiaxial
      • E-Glass, Plain-weave
      • E-Glass, Stitched (knitted, nonwoven)
      • E-Glass, Twill
      • E-Glass, Woven roving
      • E-Glass, Other
    • Other unimpregnated fabrics
      • Other, 4-harness (crowsfoot)
      • Other, 5-harness
      • Other, 8-harness
      • Other, Basket-weave
      • Other, Braided
      • Other, Multiaxial
      • Other, Plain-weave
      • Other, Stitched (knitted, nonwoven)
      • Other, Twill
      • Other, Woven roving
      • Other, Other
  • Preforms, unimpregnated
    • Chopped fiber
    • Continuous fiber
    • E-Glass
    • Other preforms
  • Prepregs, thermoplastic
    • Fabric
    • Mat
    • Tow or roving
  • Prepregs, thermoset
    • Polyester, unsaturated
      • Polyester, unsaturated, Mat
      • Polyester, unsaturated, Roving
    • Vinyl ester
      • Vinyl ester, Mat
      • Vinyl ester, Roving
  • Adhesives
    • Acrylic
      • Acrylic, Film
      • Acrylic, Foam
      • Acrylic, Hot melt
      • Acrylic, Paste
      • Acrylic, Solvent-based
      • Acrylic, Water-based
      • Acrylic, Other
    • Epoxy
      • Epoxy, Film
      • Epoxy, Foam
      • Epoxy, Hot melt
      • Epoxy, Paste
      • Epoxy, Solvent-based
      • Epoxy, Water-based
      • Epoxy, Other
    • Silicone
      • Silicone, Film
      • Silicone, Foam
      • Silicone, Hot melt
      • Silicone, Paste
      • Silicone, Solvent-based
      • Silicone, Water-based
      • Silicone, Other
    • Urethane
      • Urethane, Film
      • Urethane, Foam
      • Urethane, Other
    • Other
      • Other, Film
      • Other, Foam
      • Other, Hot melt
      • Other, Paste
      • Other, Solvent-based
      • Other, Water-based
      • Other, Other
  • Core materials and flow media
    • Balsa
    • Flow media for resin infusion
    • Foam core
      • Foam core, aluminum
      • Foam core, PVC
      • Foam core, polyurethane
      • Foam core, other
    • Honeycomb
      • Honeycomb, aluminum
      • Honeycomb, foam-filled
      • Honeycomb, other
  • Gel coats
    • Anti-fouling
    • Chemical-/corrosion-resistant
    • Conductive
    • Fire-retardant
    • General-purpose
    • Marine
    • Potable-water grades
    • UV-curable
    • Other gel coats
  • Coatings and sizings
    • Decorative
    • Flame retardant
    • In-mold
    • Paint
    • Protective
    • Sizings
    • Other coating materials
  • Casting resins
    • Unsaturated polyester
    • Other casting resins
  • Compounds
    • Bulk molding (BMC)
    • Low-pressure molding
    • Sheet molding (SMC)
    • Solid surface
    • Thermoplastic, short fiber-reinforced
    • Thick molding
  • Fillers
    • Alumina trihydrate
    • Calcium carbonate
    • Calcium sulfate
    • Gypsum
    • Kaolin
    • Mica
    • Milled glass fiber
    • Talc
  • Catalysts, promoters and curing agents
    • Cobalt naphthenate
    • Curing agents, amines
    • Curing agents, others
    • Hardeners
    • Initiators
    • Peroxides
    • Other catalysts/promoters
  • Resin additives & modifiers
    • Colorant, pigments
    • Flame/smoke-suppressant additives
    • Foaming agents
    • Thickening agents
    • Viscosity control agents
Primary manufacturing equipment
  • Casting equipment
  • Continuous laminating machines
  • Filament winding machines and software controls
  • Pultrusion equipment, thermoplastics
  • Pultrusion equipment, thermosets
  • Resin transfer molding equipment (RTM)
  • Spray booths
  • Spray guns
  • Vacuum-assisted resin transfer molding equipment (VARTM
  • Presses
    • Presses, laminating
    • Presses, vacuum
Tools/tooling materials
  • Other tools/tooling materials
  • Tools
    • Cast
    • Prototype
    • RTM/resin infusion
    • Resin injection
    • Composite
      • Composite, fiberglass
      • Composite, other
    • Metal
      • Metal, aluminum
      • Metal, steel
  • Mandrels
    • Mandrels, steel
    • Mandrels, other
  • Tooling equipment, materials and supplies
    • Clay, modeling
    • Master pattern material, polymeric
    • Master pattern material, other
    • Mold cleaners
    • Mold polishes
    • Mold release films
    • Mold release films, for prepreg
    • Mold release films, for vacuum bagging
    • Urethane
    • Mold releases
      • Mold releases, internal
      • Mold releases, liquid external
      • Mold releases, papers
      • Mold releases, sprays
      • Mold releases, waxes
Auxiliary processing equipment, repair equipment, and supplies
  • Auxiliary processing equipment
    • Abrasive tools
    • Adhesive applicators
    • Catalyst dispensers
    • Choppers
    • Drilling and cutting tools
    • Drum-handling equipment
    • Fiber-handling equipment for SMC, pultrusion, filament
    • Furnaces
    • Heaters
    • Laminate thickness gauges
    • Leak detectors
    • Mixers
    • Mold strippers
    • Ovens
    • Rollers
    • UV curing equipment
    • Other auxiliary equipment
  • Composite repair equipment
    • Repair kits and equipment
  • Supplies
    • Abrasive papers
    • Brushes
    • Filler paste
    • Gloves
    • Hand layup tools (cutters, rollers, scissors, etc.)
    • Hoses, pressure
    • Hoses, vacuum
    • Masks
    • Paint strippers for composites
    • Peel plies
    • Peel plies, nylon
    • Peel plies, polyester
    • Release papers, coated
    • Sealing tapes and materials
    • Surfacing veils
    • Tissues
    • Vacuum valves and pumps
    • Wiping cloths
    • Vacuum bags/bagging materials
      • Vacuum bagging materials, silicone
Fiber converting/prepreg manufacturing equipment
  • Looms for advanced fibers
  • Stitching equipment
Testing, gauging, monitoring, analytical equipment and software
  • Flexural testers
  • Flow meters
  • Gel timers
  • Hardness testers
  • Hardness testers, Barcol
  • Impact-testing equipment
  • Leak-testing equipment
  • Tensile testers
  • Thickness measuring equipment
  • Viscosity measurement equipment
  • NDI equipment
    • NDI equipment, ultrasonic
Fabricating services
  • Thermoplastic materials
    • Adhesive bonding
    • Continuous laminating
    • Filament winding
    • Hand layup
    • Honeycomb structures
    • Injection molding
    • Moldmaking and patternmaking
    • Pultrusion
    • Resin transfer molding (RTM)
  • Thermoset materials
    • Adhesive bonding
    • Coating and painting
    • Compression molding
    • Continuous laminating
    • Cutting, finishing, and machining
    • Fiber placement
    • Filament winding
    • Hand layup
    • Honeycomb structures
    • Moldmaking and patternmaking
    • Pultrusion
    • Resin transfer molding (RTM)
    • Sprayup
    • Textile processing for composites (braiding, stitching,
    • Vacuum forming
Composite Structures & Components
  • Armor, ceramic
  • Armor, composite
  • Automotive, body panels & substructures
  • Automotive, interior (seats, IPCs, floor panels, etc.)
  • Infrastructure, composite
  • Laminate panels, with core
  • Laminate sheets, solid
  • Marine, boat (hulls, decks, bulkheads, etc.)
  • Marine, docks/pilings
  • Marine, other
  • Pressure vessels
  • Profiles
  • Rods
  • Tubes
Design, testing, consulting, other services
  • CAD/CAM/CAE design
  • Education/Training
  • Materials analysis
  • Product design
  • Repair services, composites
  • Repair services, equipment and machines
  • Consulting
    • Consulting, business development/acquisition
    • Consulting, materials
    • Consulting, process development
    • Consulting, procurement/purchasing/specification
    • Consulting, structual design