Gerber Technology Showroom

Contact Information

Please visit: www.gerbertechnology.com

Phone: (860) 871-8082
Toll-Free: (800) 826-3243
Fax: (860) 872-3779

Mailing Address:
24 Industrial Park Rd. W

Tolland, CT USA 06084

Engineer Contact: Dudley Fenn , (860) 871-3730 dudley.fenn@gerbertechnology.com

Sales Contact: Dudley Fenn , (860) 871-3730 dudley.fenn@gerbertechnology.com

Additional Locations:

» 145 Avalon Ridge Pl., Ste. 125 Atlanta GA , USA (770) 448-4448

» 17777 Center Court Dr., Ste.175 Cerritos CA , USA (562) 916-7771

» 1200 N. Bowser Rd. Richardson TX , USA (214) 668-1586

Products/Services:
Manufacturer of a complete line of automated cutting systems for accurate cutting and optimization of composite materials. Systems are designed to improve the utilization of material through optimum nesting methods and precise cutting by maximizing user operations and resources.

A Special Message from Gerber Technology

Product Categories of Gerber Technology

  • Auxiliary processing equipment, repair equipment, and supplies
    • Auxiliary processing equipment
      • CAD/CAM/CAE hardware/software
      • Cutting equipment
        • Cutting equipment, computerized
        • Cutting equipment, laser
        • Cutting equipment, ultrasonic
      • Drilling and cutting tools
      • Kitting equipment and software
      • Material handling equipment
      • Roll stands
      • Routers
      • Sheeters
  • Design, testing, consulting, other services
    • CAD/CAM/CAE design

As Seen in Print

Corvette's carbon hood creates shock and awe 7/20/2009
North America’s first mass-produced, all-CFRP hood raises the bar for production sports cars....
JEC COMPOSITES 2009 Product Showcase 6/16/2009
Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surpr...
JEC Composites 2009 showcase 5/18/2009
Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surpr...
Italian Tier 1 supplier benefits from automated cutting technology 6/30/2008
Italian aerospace supplier CAM uses an automated cutting system from Gerber Technology for cutting fiberglass,...
Automate or emigrate 3/1/2008
Automated fiber and tape placement is not just a notion, but a real manufacturing strategy, and one being embr...
Engineering Insights: Composites Lessen Load in Fuel-Cell Demonstrator 2/1/2008
CFRP decklid helps offset fuel-cell system weight to meet vehicle weight target....
Blended Wing UAV 5/1/2007
Unique unmanned craft's robust composite design a plus for rough duty....
SAMPE 2006 Product Showcase 7/1/2006
SAMPE's annual Symposium welcomes 4,300 composites professionals to Long Beach, looks ahead to Baltimore....
SAMPE 2005 Product Showcase 7/1/2005
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion....
Composites take off ... in some civil helicopters 3/1/2005
Slowed by certification requirements, composites nevertheless are finding their way into the fuselages and rot...
Post-show review of the 2004 U.S. SAMPE Symposium 7/1/2004
Largest-ever Symposium serves up a large helping of news and new technologies from advanced composites supplie...
Resin transfer molding and preforms for jet engine stators 7/1/2004
New 3-D woven preforms and nanofillers will improve part quality and reduce manufacturing costs....
Nacelle manufacturers optimize hand layup and consider closed molding methods 5/1/2004
Focused on optimizing traditional hand layup, nacelle and thrust reverser manufacturers cast an eye on future ...
Composite rib structure for Airbus A380 vertical tail 3/1/2004
Fabricator exceeds Airbus performance requirements with hand layed rib truss structure for A380....
Corvette gets leaner with carbon fiber hood 3/1/2004
Advances in materials and processing yield high-volume, low-mass hood for GM flagship....
Fiber Placement The Centerpiece Of NCAM 1/1/2004
Cryogenic composites just one facet of Lockheed Martins National Center for Advanced Manufacturing....
Experienced Aerospace Manufacturer Relies On Proven Methods 3/1/2003
Composite Structures LLC employs metal bond techniques for high-performance aircraft and rotorcraft components...