Bayer MaterialScience AG Showroom

Contact Information

Please visit: www.bayermaterialscience.com

Phone: +49 214 301
Toll-Free: +800 847 4669 6757
Fax: +49 0 214 3038 810

Mailing Address:
Kaiser-Wilhelm-Allee

Leverkusen (NRW), Germany 51368

Products/Services:
One of the world's largest producers of polymers and high-performance plastics, including developments in coatings, adhesives, insulating materials and sealants, polycarbonates and polyurethanes.

Product Categories of Bayer MaterialScience AG

  • Materials
    • Matrix resins, thermoplastic
      • Polycarbonate
    • Matrix resins, thermoset
      • Urethane
    • Adhesives
      • Acrylic
        • Acrylic, Film
        • Acrylic, Foam
        • Acrylic, Hot melt
        • Acrylic, Paste
        • Acrylic, Solvent-based
        • Acrylic, Water-based
        • Acrylic, Other
      • Bismaleimide
        • Bismaleimide, Film
        • Bismaleimide, Foam
        • Bismaleimide, Hot melt
        • Bismaleimide, Paste
        • Bismaleimide, Solvent-based
        • Bismaleimide, Water-based
        • Bismaleimide, Other
      • Cyanoacrylate
        • Cyanoacrylate, Film
        • Cyanoacrylate, Foam
        • Cyanoacrylate, Hot melt
        • Cyanoacrylate, Paste
        • Cyanoacrylate, Solvent-based
        • Cyanoacrylate, Water-based
        • Cyanoacrylate, Other
      • Epoxy
        • Epoxy, Film
        • Epoxy, Foam
        • Epoxy, Hot melt
        • Epoxy, Paste
        • Epoxy, Solvent-based
        • Epoxy, Water-based
        • Epoxy, Other
      • Nylon
        • Nylon, Film
        • Nylon, Foam
        • Nylon, Hot melt
        • Nylon, Paste
        • Nylon, Solvent-based
        • Nylon, Water-based
        • Nylon, Other
      • Phenolic
        • Phenolic, Film
        • Phenolic, Foam
        • Phenolic, Hot melt
        • Phenolic, Paste
        • Phenolic, Solvent-based
        • Phenolic, Water-based
        • Phenolic, Other
      • Polyimide
        • Polyimide, Film
        • Polyimide, Foam
        • Polyimide, Hot melt
        • Polyimide, Paste
        • Polyimide, Solvent-based
        • Polyimide, Water-based
        • Polyimide, Other
      • Silicone
        • Silicone, Film
        • Silicone, Foam
        • Silicone, Hot melt
        • Silicone, Paste
        • Silicone, Solvent-based
        • Silicone, Water-based
        • Silicone, Other
      • Urethane
        • Urethane, Film
        • Urethane, Foam
        • Urethane, Hot melt
        • Urethane, Paste
        • Urethane, Solvent-based
        • Urethane, Water-based
        • Urethane, Other
      • Other
        • Other, Film
        • Other, Foam
        • Other, Hot melt
        • Other, Paste
        • Other, Solvent-based
        • Other, Water-based
        • Other, Other
    • Core materials and flow media
      • Foam core
        • Foam core, polyurethane
    • Coatings and sizings
      • Paint
      • Protective
    • Compounds
      • Thermoplastic, short fiber-reinforced
  • Design, testing, consulting, other services
    • Product design

As Seen in Print

Resin systems update: The greening of thermosets 3/25/2009
Thermoset resin formulators seek environmental benefits as customers demand reduced cost and increased perform...
Composites ride and support the rails 1/21/2009
Increased ridership and heavier axle loads on rail systems around the world signal a potential boon for compos...
Waves Of Change: From Shock To Opportunity 6/1/2006
Closing of Clark Foam opens surfboard industry to new technologies....
Natural Fiber Composites Slowly Take Root 2/1/2006
Lower-than-expected automotive growth reshapes outlook, encourages process development and exploration of new ...
In-Mold Decorating Dresses Up Composites 8/1/2005
Automotive/industrial markets foster development of finishing techniques that eliminate costly paint lines....
Fuel Economy Drives Big Rig Composites 6/1/2005
A variety of materials and processing methods are lightweighting and economizing trucks and trailers in the co...
Roof Module Reflects Well On Paintless Composites 10/1/2004
Unique long-fiber injection process yields a paintless high-gloss finish, 20 percent weight reduction and impr...
SPE Automotive Composites Conference Highlights 10/1/2004
Highlights of the 4th annual Society of Plastics Engineers celebration of car composites....
User-friendly resins expanding composites' reach 6/1/2004
Novel niche formulas enable composites breakthroughs for new market applications, traditional material replace...