AOC LLC Showroom

Contact Information

Please visit: www.aoc-resins.com

Phone: (901) 854-2800
Toll-Free: (866) 319-8827
Fax: (901) 854-7277

Mailing Address:
950 Hwy. 57 E

Collierville, TN USA 38017

Sales Contact: Reagan Stephens , (901) 861-8370 rstephens@aoc-resins.com

Engineer Contact: Dr. Tom Folda , (901) 854-2877 tfolda@aoc-resins.com

Additional Locations:

» 38 Royal Street Guelph , Ontario, Canada (800) 700-2991

» Ipswich, Suffolk , England, United Kingdom +44 147 3288 997

» Mexico City , Mexico +52 555 7177 000

Products/Services:
Manufacturer of unsaturated polyester and vinyl ester resins, gel coats and colorants for open or closed mold requirements, supported with R&D and technical service. Product supplied from strategically located plants in North America, Europe and Asia.

A Special Message from AOC LLC

Product Categories of AOC LLC

  • Materials
    • Matrix resins, thermoplastic
      • Other thermoplastics
    • Matrix resins, thermoset
      • Acrylic
      • UV-curable
      • Unsaturated polyester
        • Unsaturated polyester, bisphenol A fumerate
        • Unsaturated polyester, DCPD-modified
        • Unsaturated polyester, fire-retardant
        • Unsaturated polyester, isophthalic
        • Unsaturated polyester, orthophthalic
        • Unsaturated polyester, terephthalic
      • Vinyl ester
      • Other thermosets
    • Gel coats
      • Chemical-/corrosion-resistant
      • Fire-retardant
      • General-purpose
      • Marine
      • Potable-water grades
      • UV-curable
    • Coatings and sizings
      • Sizings
    • Casting resins
      • Acrylic
      • Epoxy
      • Unsaturated polyester
    • Resin additives & modifiers
      • Colorant, pigments
      • Low-profile additives
      • Thickening agents

Product Announcements

As Seen in Print

SPE's ACCE 2009 Show Preview 7/15/2009
The Society’s 2009 Automotive Composites Conference & Exhibition charts an industry at a crossroads....
Researchers nano-enhance natural fiber 7/13/2009
Mississippi State University uses nanoparticle impregnation to improve the performance of kenaf fiber in compo...
COMPOSITES+POLYCON 2009 Showcase 3/27/2009
Despite the deepening recession, composites pros returned to the show in its new time slot to explore the weal...
Resin systems update: The greening of thermosets 3/25/2009
Thermoset resin formulators seek environmental benefits as customers demand reduced cost and increased perform...
One-piece molded truck body uses customized resin formulation 1/27/2009
When General Motors Corp. (Flint, Mich. ) opted to update its small Astro cargo van in 2007 concurrent with t...
NAIA 2009 show highlights 1/21/2009
The Detroit auto exhibition’s hybrid and electric vehicle introductions underscore the need for lightweighting...
Composites ride and support the rails 1/21/2009
Increased ridership and heavier axle loads on rail systems around the world signal a potential boon for compos...
Competitive to the core 12/2/2008
This new superyacht combines luxury innovations with energy-efficient construction, enabled by a new marine-gr...
FRP forms enable fluted concrete column design 10/6/2008
The Century Project, a 42-story luxury condominium tower in Los Angeles, Calif. , designed by Robert A. M....
Automotive Composites: Taking Subjectivity out of Class A Surface Evaluation 8/3/2008
Toward the goal of more consistent, repeatable and quantifiable Class A surface analysis, automakers and syste...
Composites Pick Up New Applications in Light Trucks 8/3/2008
Long a bastion of steel, the tougher-duty pickup segment of the light truck market is warming to the benefits ...
Cast polymer concrete structures save city's sewers 4/1/2008
Beneath its historic colonial charm, Charleston, S.C. had an underground sewer system in need of repair. Engin...
NAIA Show Highlights 2/1/2008
The 2007 Detroit Auto Show emphasizes “green” themes and high performance....
Composites Polycon 2007 Showcase 12/1/2007
Tampa show attendance is up despite slow economy. ACMA reschedules 2008 show....
Hybrid bridge design employs composite beams 12/1/2007
The Texas Dept. of Transportation (TxDOT) recently installed over a drainage ditch in Refugio County a new bri...
Carbon fiber buys its way onboard 9/1/2007
First used in one-off yacht and powerboat designs, where cost is no obstacle in the search for a performance e...
Composites Technology Digs-In Underground 4/1/2007
The Underground Construction Technology Conference welcomes corrosion-resistant composites for underground inf...
Innovation Driving Automotive SMC 2/1/2007
New materials, methods and machinery are restoring sheet molding compound's preferred material status for auto...
SAMPE 2006 Product Showcase 7/1/2006
SAMPE's annual Symposium welcomes 4,300 composites professionals to Long Beach, looks ahead to Baltimore....
FRP Two way Joist System The Answer For Cleanroom Concrete Flooring 6/1/2006
When electronics giant Texas Instruments Inc. (TI, Dallas, Texas) spec'd the 200,000 ft2 (18,850m2) multistory...
Detroit Auto Show a showcase for new composites applications 2/1/2006
SMC makes a big comeback in production models, while carbon fiber sustains interest in high-end and aftermarke...
In-mold Preforming Cost-justifies Closed Molding 10/1/2005
Computer-controlled robots spray preforms directly into the part tool, a running start for closed molding....
POLYCON 2005 Highlights 4/1/2005
ICPA's "last" cast polymer industry show its best....
SPE Automotive Composites Conference Highlights 10/1/2004
Highlights of the 4th annual Society of Plastics Engineers celebration of car composites....
Composite manufacturers thrive on products manufactured for the Automotive Aftermarket 8/1/2004
Carbon and fiberglass accessories make up a big chunk of this multi-billion-dollar industry....
Composites Recreate Ultimate Alien 8/1/2004
Largest-ever theme park ride icon comes to life in glass/epoxy laminates....
User-friendly resins expanding composites' reach 6/1/2004
Novel niche formulas enable composites breakthroughs for new market applications, traditional material replace...
Techonologies for UV curing of composite laminates demonstrated 4/1/2004
Racing go-kart project demonstrates advances in UV processing of composites....
NAIA auto show spotlights pop-free SMC, cars with carbon fiber 2/1/2004
Detroit auto exhibition spotlights pop-free SMC, cars with carbon fiber....
How Are Composite Bridges Performing? 12/1/2003
Ongoing monitoring and inspection demonstrates that composite bridge decks meet or exceed expectations....
Vinyl Esters Make Tough Parts For Highly Corrosive Applications 8/1/2003
An array of case studies showcases the growing acceptance of fiberglass/vinyl ester composites in harsh indust...
JEC Composites 2003 SAMPE Europe Conference Review 6/1/2003
Paris is the debut stage for a galaxy of composites industry innovations....