Altair Engineering Inc. Showroom

Contact Information

Please visit: www.altair.com

Phone: (248) 614-2400
Toll-Free:
Fax: (248) 614-2411

Mailing Address:
1820 E. Big Beaver Rd.

Troy, MI USA 48083-2031

Sales Contact: Martin Nichols , (248) 614-2400 martin@altair.com

Engineer Contact: Mike Heskitt , (249) 614-2400 mjh@altair.com

Additional Locations:

» 2445 McCabe Way, Ste. 100 Irvine CA , USA (949) 221-0930

» 3303 Monte Villa Pkwy., Ste. 320 Bothell WA , USA (425) 481-7476

» 65 E. Wadsworth Park Dr., Ste. 210 Draper UT , USA (801) 349-1141

» 7800 Shoal Creek Blvd., Ste. 200N Austin TX , USA (512) 467-0618

» 2685 Marine Way, Ste. 1209 Mountain View CA , USA (650) 967-4675

Products/Services:
Product design consulting services and computer-aided engineering (CAE) software to develop high-performance, lightweight products with composite materials.

Product Categories of Altair Engineering Inc.

  • Auxiliary processing equipment, repair equipment, and supplies
    • Auxiliary processing equipment
      • CAD/CAM/CAE hardware/software
  • Design, testing, consulting, other services
    • CAD/CAM/CAE design
    • Consulting
      • Consulting, other
    • Finite element modeling/analysis (FEM/FEA)
    • Materials analysis
    • Product design
    • Testing
      • Testing, materials
      • Testing, product

As Seen in Print

Challenge of engineering retrofit blades 5/17/2009
Myriad interrelated design factors are considered in new blades for turbines originally built for high-wind re...
Aircraft simulation gets composites aware 2/23/2009
Rapid software evolution enables faster, better virtual solutions to complex composite design problems....
COMPOSITESWORLD Expo Preshow Preview 8/21/2008
CWExpo organizers pull aside the curtain for a sneak preview of the Expo's two keynote speakers and some new p...
Carbon fiber buys its way onboard 9/1/2007
First used in one-off yacht and powerboat designs, where cost is no obstacle in the search for a performance e...
Predicting through-hole impact on boat structural girders 9/1/2007
“Boat owners want an interior to be proud of,” says Susan Lake, senior R&D engineer at marine engineer...
FEA Roundup: Design, Simulation And Analysis Converge 4/1/2007
New modeling and analysis software products increase the accessibility and reliability of finite element analy...
Innovative Composite Design May Replace Aluminum Chassis 2/1/2006
It's been called the automotive engineer's dream material. Able to assume any shape while delivering stiffness...
In-mold Preforming Cost-justifies Closed Molding 10/1/2005
Computer-controlled robots spray preforms directly into the part tool, a running start for closed molding....