Pinette Emidecau Industries
Pinette
5 rue Paul Sabatier, BP 80077
Chalon Sur Saone, 71103 FR
33 385 478 800
pinetteemidecau.eu/en
About Pinette Emidecau Industries
IS THIS YOUR COMPANY?
As Seen On CompositesWorld
Pinette Emidecau Industries Supplies the Following Products
- Chillers (for molds, production lines)
- Coaters
- Metal, aluminum
- Metal, steel
- Other primary manufacturing equipment
- Other testing equipment
- Ovens
- Preform manufacturing equipment
- Preform manufacturing equipment
- Presses, compression molding
- Presses, diaphragm forming
- Presses, hydraulic
- Presses, laminating
- Presses, low-pressure
- Presses, software and controls
- Presses, superplastic forming
- Presses, thermoforming/pressure forming
- Presses, vacuum
- Resin transfer molding equipment (RTM)
- Robotic handling equipment
- RTM/resin infusion
- Vacuum-assisted resin transfer molding equipment (VARTM
Editorial, News, and Products
-
JEC World 2024 highlights: Thermoplastic composites, CMC and novel processes
CW senior technical editor Ginger Gardiner discusses some of the developments and demonstrators shown at the industry’s largest composites exhibition and conference.
-
The potential for thermoplastic composite nacelles
Collins Aerospace draws on global team, decades of experience to demonstrate large, curved AFP and welded structures for the next generation of aircraft.
-
Plant tour: Daher Shap’in TechCenter and composites production plant, Saint-Aignan-de-Grandlieu, France
Co-located R&D and production advance OOA thermosets, thermoplastics, welding, recycling and digital technologies for faster processing and certification of lighter, more sustainable composites.
-
CW presents "CW Tech Days: Thermoplastics for large structures"
Attend this May 18th interactive webinar sponsored by Altair, Mitsubishi Chemical Group, Toray and Collins Aerospace which will explore the materials and processing technologies that are enabling the transition into thermoplastics.
-
High-rate, automated aerospace RTM line delivers next-gen spoilers
At Spirit AeroSystem’s Prestwick facility in Scotland, a glimpse of the future of aerocomposites manufacturing in a resin transfer molding line for A320 spoilers.
-
Consortium targets solutions for carbon fiber thermoplastic composite structures
The HAICoPAS project, led by Hexcel and Arkema, aims to optimize UD tape design and manufacture for aerospace and automotive composites.
-
Institut de Soudure Groupe optimizes production control for large-sized composite parts
Partnership with aerostructures supplier Duqueine installs thermography to reduce inspection time and cost.
-
FastRTM project demonstrates manufacturing of complex, net-shape composite parts
Automated production platform developed by a French industry consortium utilizes an epoxy resin system from Hexion Inc.
-
Automated Preforming, Part 3: Quilted Stratum Process
CW’s tour of Cetim and the QSP line which preforms multi-thickness thermoplastic materials in 40-90 seconds for composite parts with cycle times of 1-2 minutes.
-
Preforming goes industrial: Part 1
ATL and AFP-based preforming options now abound for processing dry and/or impregnated reinforcements as quickly as 1 minute or less with potential yearly part yields in the millions.
-
JEC 2017 – Aiming for Industrialization
The exhibit floor in Paris reflected composites’ move toward high-rate and high-volume production.
-
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
-
Turnkey manufacturing systems: Part-per-minute thermoplastic composites
Pinette Emidecau Industries’ (PEI, Chalon-sur-Saône, France) leads a consortium of providers that are collaborating on the Quilted Stratum Process (QSP), a means to accelerate thermoplastic composites processing in the auto industry.
-
Turnkey manufacturing systems: Materials, markets and maturation
Automated production cells promise affordability and less risk in scaling up composites production, but are they really the path forward?
-
Plant Tour: Fokker Aerostructures: Hoogeveen, Netherlands
This Dutch aerospace supplier leverages its founder’s pioneering spirit from a century ago to lead the way, today, in thermoplastic aerocomposites.
-
Automation and rapid processing dominate at JEC Americas
Highlights include Fiber Patch Preforming, automated potting and insert equipment and processes delivering composite parts in minutes.
-
Thermoplastic composites technology: A view from Europe
For this Dutch consortium, bringing the manufacturability of thermoplastic materials to maturity is the goal in concert with OEMs, materials and equipment supplier members.
-
2014 JEC Europe Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.
-
JEC Europe 2014 Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.
-
Business and busy-ness
CT editor-in-chief Jeff Sloan returns for JEC Europe 2014 in Paris with observations about several intriguing composites industry trends.
-
Albany Engineered Composites: Weaving the Future in 3-D
This 3-D weaver turned composite component supplier pursues a future in 3-D structures through continuous technology development.
-
Inside a thermoplastic composites hotbed
As production of the A350 XWB ramps up, so does manufacture of the thermoplastic fuselage clips the plane requires. HPC sees how it’s done.
-
Main landing gear doors designed for all contingencies
For the Airbus XWB airliner, they must meet strict structural, aerodynamic, emergency and aesthetic requirements.
-
High-speed RTM work cell holds promise for faster part production
Pinette Emidecau Inc. (Troy, Mich.) reports that it has developed an automated, high-speed RTM cell for aerospace and automotive manufacturing applications that is designed to increase molded part throughput and improve process consistency.