Increased fiber placement automation
New Product Announcements Published: 4/30/2013

MAG IAS has developed a new system that reduces automatic fiber placement system downtime by automatically exchanging cut/clamp/restart (CCR) units that need service for fresh units.

Automated tape-laying venture
New Product Announcements Published: 6/1/2012

Fraunhofer ICT touted its growing array of innovative processing approaches. One, in cooperation with Fiberforge Corp., involves production of high-performance structural parts, typically for automotive applications, using Fiberforge’s RELAY 2000 au...

Vertical gantry fiber placement system
New Product Announcements Published: 3/23/2012

MAG IAS has introduced the VIPER 7000, a vertical gantry fiber placement system.

Lab scale fiber placement machine
New Product Announcements Published: 1/25/2012

Automated Dynamics has introduced the Research Workcell, a small-scale, self-contained robotic automated fiber placement (AFP) machine designed to be an affordable and flexible piece of research and development equipment for higher education institu...

Integrated AFP/ATL machine
New Product Announcements Published: 1/25/2012

MAG IAS has introduced the new GEMINI Composite Processing System, a manufacturing system capable of switching within minutes from automated fiber placement (AFP) to automated tape laying (ATL).

Fiber placement programming software introduced to European market
New Product Announcements Published: 1/18/2012

CGTech reported on Jan. 18 that it will introduce to the European market its VERICUT Composites Paths for Engineers (VCPe) at the 2012 JEC Composites show.

Laser-based heating for fiber placement
New Product Announcements Published: 11/1/2011

Automated fiber placement (AFP) machinery manufacturer Automated Dynamics reports that it is testing the use of a laser-based heating method for its AFP equipment. Integrated into Automated Dynamics’ fiber placement technology, it will replace and/o...

Automated flatbed tape layer
New Product Announcements Published: 1/13/2010

The new Flat Charge Laminator (FCL) from MAG Industrial Automation Systems is designed for automated, high-production layup of composite spars, beams, stringers and similar parts for wind turbine blades.

Fiber placement for tubulars
New Product Announcements Published: 12/5/2008

Automated Dynamics' AFP-0245 Tubular produces parts up to 45 ft/13.7m long and 2 ft/0.6m in diameter.

AFP system targets R&D
New Product Announcements Published: 10/7/2008

Mikrosam has developed an automated fiber placement (AFP) machine for laboratory or research and development use.

« Prev | Page 1 of 1 | Next »