Robotic trimming systems

KMT Robotic Solutions Inc.’s (Auburn Hills, Mich.) new robotic trimming systems and products include the RoboTrim RT-1900, a high-throughput model that features a two-sided, 19-ft/5.8m rotating servo table that can support up to 700 lb/317.5 kg on each side and accommodate parts up to 13 ft long by 5 ft wide (4m by

Related Topics:

Related Suppliers

KMT Robotic Solutions Inc.’s (Auburn Hills, Mich.) new robotic trimming systems and products include the RoboTrim RT-1900, a high-throughput model that features a two-sided, 19-ft/5.8m rotating servo table that can support up to 700 lb/317.5 kg on each side and accommodate parts up to 13 ft long by 5 ft wide (4m by 1.2m). The new RoboTrim RT-1200 features two riser-mounted KMT AccuTrim R-110 robots inside a steel enclosure. Its two-sided, 12-ft/3.6m rotating table can support up to 1,000 lb/453.6 kg on each side and accommodates part sizes to 9 ft long by 2 ft wide (2.7m by 0.6m). The RoboTrim RT-1002 features one enclosed KMT AccuTrim R-44 robot. The system’s two-sided rotating table has a 1,000-part-and-fixture capacity and can rotate parts as large as 3 ft by 5 ft (0.9m by 1.2m) into and out of the cell in less than 3 seconds. The RoboKnife RT-200 is a portable, turnkey robotic knife trimming solution that features a riser-mounted robot and a servo-controlled rotating fixture table that enables trimming of parts up to 24 inches long/wide and 30 inches tall (610 mm by 610 mm by 762 mm). CamPro is PC-based offline programming software that enables manufacturers to seamlessly convert CAM trimming and milling paths into complete 6-axis robot programs. It supports conversion of Mastercam programs or any CAM program that can be exported in .apt format.