You are viewing products related to: RTM

1 to 9 of 9

Pressure-indicating sensor film for resin injection molding - 8/21/2009

Sensor Products Inc. has developed a new version of its Pressurex pressure-indicating film for use in resin transfer molded (RTM) applications.

RTM, pultrusion resin - 2/1/2008

Scott Bader Co. Ltd. (Wollaston, U.K.) has introduced low-viscosity Crystic Crestapol 1210 resin for resin transfer molding (RTM) and pultrusion processes. Reportedly, the resin can be optimized to achieve cycle times of six to seven minutes for RTM. Rapid mold fill and demold are attainable, says the company, even

Corrosion-resisitant vinyl esters - 10/1/2007

Cook Composites and Polymers’ (Kansas City, Mo.) Epovia corrosion-resistant vinyl ester resins are designed for use in fabricating industrial equipment and structures and are said to provide a significantly enhanced defense against various kinds of corrosive chemicals when compared with many other plastics and

Adhesive Dispenser - 7/1/2007

Sulzer Mixpac USA Inc. (Salem, N.H.; formerly ConProTec Inc.), a maker of two-component adhesive dispensing systems, has introduced the S-50 System of 10:1 ratio cartridges for its MIXPAC handheld cartridge dispensing system. The MIXPAC system consists of a manual dispensing gun, cartridge and static mixer. Cartridges

Dispensing System - 2/1/2006

Sealant Equipment & Engineering Inc.'s (Plymouth, Mich.) Micro-Meter 2 Servo, a positive-displacement, two-component meter/mix/dispense system, is designed to apply small, precision beads and small, metered shots of precisely mixed resins. According to the company, the system's Servomotor design provides

Low-temp/low-profile resin - 8/1/2005

Hexion Specialty Chemicals' (Columbus, Ohio) trademarked Veriflect 2290, a new low-temperature, low-profile unsaturated polyester resin for infusion and resin transfer molding (RTM), is formulated to eliminate surface flaws caused by fabric print-through and volumetric shrinkage that often occurs when conventional

Molding simulation software - 11/1/2004

ESI Group (San Diego, Calif., U.S.A.) has launched PAM-RTM 2004, a liquid composite molding (LCM) simulation software package that provides rapid solutions for preliminary design, refined calculations for process and mold optimization, and final design verification. The software is suited for composite manufacturing

Injection valve - 4/1/2004

Plastech Thermoset Tectonics Ltd. (Gunnislake, U.K.) offers the Turbo Autosprue (TAS) resin injection valve, designed to outperform valves now used in resin transfer molding (RTM) and Light RTM applications. The valve meets all European CE machinery directive standards and installs or removes in less than three

Precision manufacturing of fiberglass components - 10/1/2003

Century Composites (Tyrone, Ga., U.S.A.) offers precision manufacturing services for customers in need of custom fiberglass-reinforced components and injection molded products. The company's in-house tool design and moldmaking operations facilitate optimal tooling and production. Custom fiberglass manufacturing

« Prev | Page 1 of 1 | Next »