You are viewing products related to: Compression, Pressure Molding

1 to 10 of 18

Energy-efficient hydraulic lab press - 3/4/2009

USA Technical Machine Products' Eco-Lab Press features a two-stage cooling system to reduce thermo cycling.

Data acquisition system for compression molding - 1/8/2009

Lawton Machinery Group's data acquisiton system checks actual machine parameters against contoller setpoints.

Compression press line extended - 10/1/2007

Greenerd Press & Machine (Nashua, N.H.), in alliance with press manufacturer Tianjin Tianduan Press Co. Ltd. (Tianjin, China) has expanded its own line of compression molding presses with Tianjin pres-ses of higher tonnage (to 10,000 tons) that have press bed dimensions that exceed 240 inches/6,100 mm. Greenerd

Compression molding press - 2/1/2007 - 2/1/2007

Beckwood Press Co. (St. Louis, Mo.) has introduced a new 50-ton hydraulic compression molding press made specifically to form composite fenders in the automotive industry. Engineered to the customer's compression molding requirements with a high level of control over position and speed, the low-tonnage device

SMC for HVAC - 2/1/2007

IDI Composites International (Noblesville, Ind.) has developed a new UL-approved SMC (sheet molding compound) specifically for the heating, ventilation and air conditioning (HVAC) market. Dubbed SMC E5V-204, it features good corrosion resistance and is said to be a suitable replacement for air conditioning drain pans

Molding Equipment - 6/1/2006

American Matrix Corp.'s (Tarpon Springs, Fla.) new Progressive Discreet Molding System (PDMS) line of molding equipment is intended as an alternative to thermoforming of preconsolidated panels, which involves two processing steps. PDMS is designed for rapid, waste-free production of fully consolidated,

Polyester resins - 4/1/2006

Ashland Composite Polymers (Dublin, Ohio) has introduced three new unsaturated polyester resin formulations. The resins, available in one Class A and two low-density structural formulations, have been added to the company's AROTRAN line of resins for the transportation industry. The Class A formulation's specific

Vacuum Lifter - 4/1/2006

Anver Corp. (Hudson, Mass.) has made available a new custom vacuum pad attachment for its VT Series tube lifter, enabling one person to remove large, lightweight vacuum molded parts directly from a mold. Available in air- or electric-powered models, the vacuums provide 100 percent duty cycle and have a quick-connect

Strip Heaters - 2/1/2006

Research Inc.'s (Eden Prairie, Minn.) StripIR series of strip heaters use parabolic reflectors to apply heat to narrow areas when forming plastic or curing adhesive. The lamp unit reportedly reaches 90 percent of operating temperature within three seconds from a cold start, and falls to 10 percent within five seconds

Compression Molding Press - 2/1/2006 - 2/1/2006

CARVER Inc.'s (Wabash, Ind.) E-Series presses are the first all-electric compression molding systems designed for round-the-clock production of products from thermoset, thermoplastic and other moldable materials as well as bonding and laminating applications. Their electric drive systems accurately ramp clamp force

« Prev | Page 1 of 2 | Next »