Airtech
Published

Sandwich structure makes hangars possible

Greek company Dasyc has developed the high-strength Composite Modular Transportable Hangar (CMTH), which uses interlocked composite sandwich panels to ease assembly and disassembly.

Share

Dasyc's Composite Modular Transportable Hangar uses a series of interlocked composite
sanwich panels to allow quick and easy assembly. The final structure features strength equal to that of a concrete or steel building and can be used for automotive, military, aerospace and a
variety of other end markets.

Hexcel's (Leicester, UK) HiMax glass fiber fabrics were selected by Dasyc SA (Athens, Greece) for the manufacture of its Composite Modular Transportable Hangar (CMTH). Constructed from prefabricated composite sandwich panels, this structure can be employed in a variety of civil or military applications. The use of Hexcel quadaxial reinforcements enabled Dasyc to manufacture a composite structure with a strength equivalent to that of a concrete or steel building.

Dasyc SA specializes in the processing of thermoplastics, bulk moulding compound and composites for the automotive, military, aerospace, electrical, and sports and leisure sectors. In 2010, the company launched CMTH to address a need for mobile storage, parking and housing structures. The patented design enables rapid transportation and assembly in any location. Disassembly is equally straightforward. The modules which make up the hangar can be stacked and stored in a limited space, and are designed for transport by truck, sea or air.

Possible applications for the hangars range from housing aircraft, helicopters and military vehicles, to the storage of equipment at construction sites or airports. Field hospitals, on-site office space and disaster relief/emergency response facilities are also possible. Composite sandwich panels are ideal for this application since they provide strength, stiffness and thermal insulation, as well as ease of manufacture and simplicity of assembly. The composite panels are lightweight, simplifying transportation and installation, and corrosion resistant, which results in minimal maintenance requirements. The installed structure also exhibits low infrared (IR) and radar signatures — key benefits for military applications.

Hangar interior.

Unlike permanent metal or concrete constructions, the composite structure can be moved and adapted to new requirements. The composite hangar has been tested and certified in cooperation with the National Technical University of Athens and is designed to withstand significant loads, offering a strength equivalent to that of traditional concrete or steel structures. Dasyc has already delivered three hangars to the Hellenic Air Force (HAF) and is now promoting the product internationally.

The composite panels are assembled together to form arches. Each arch is made up of a varying number of main panels (2.1m by 3.7 m), one half-size panel (1.15m by 3.7m) and two edge panels (which interface with the ground). All panels have the same radius of curvature (approximately 16.9m) and each arch is a geometric arc. The length of the arch can be adjusted by using a different number of main panels. The length of the hangar depends on the number of arches used – adding one arch increases the length by 3m.

For the hangars delivered to HAF, 10 arches (each constructed from 21 main panels) were used to give a hangar with a maximum height of 10.6m, a width of about 31m and a length of 30.7m. The panels are manufactured at Dasyc’s production plant in Markopoulo using vacuum-assisted resin transfer molding (VARTM). The 80-mm thick panels are sandwich structures consisting of a hard polyurethane (PU) core material (72 mm thick) between two laminate skins (each 4 mm thick) of glass fiber-reinforced polyester resin. In order to improve the stiffness of the construction, the panels are corrugated with a wave length of 1.5m and wave height of 380 mm.

For this project Dasyc required reinforcements that would form a composite structure with a strength similar to that of a concrete or steel, and capable of withstanding the same structural loads (wind load, snow load, working loads, etc.) as specified by the Eurocodes building regulations. To provide the required mechanical properties Hexcel Reinforcements UK (formerly Formax) supplied its FGE112 1200 g/m2 quadaxial fabric, consisting of four layers of E-glass fiberes aligned in the 0°/-45°/90°/+45° directions and stitched together with polyester thread. Four layers of FGE112 were used in each skin. In addition to imparting good structural support and stiffness to the laminate, quadaxial fabric is a cost-effective solution for reducing labor in the layup process as it is possible to apply multiple layers simultaneously. The isotropic properties exhibited by the quadaxial fabric also facilitated the development and analysis process for the hangar structure since it was easier to apply the standard building codes and gain customer acceptance.

Hangar assembly/installation.

To aid resin flow during molding, Hexcel supplied 450 g/m2 continuous filament mat. Approximately 40 tonnes of Hexcel glass fiber reinforcement was used in the hangars delivered to HAF. To validate the performance of the composite panels Dasyc conducted extensive testing. This included tests on standardized samples and small-scale panels, and finished with bending tests on assembled panels.

The outer surface of the panels is coated with an ISONPG gel coat (available in a number of colors), which provides good weather resistance. The hangars can be installed using standard tools and a crane. Panels are assembled with the use of screws andbolts, and elastic gaskets are used to seal the joints. Installation does not require any special subterranean preparation. Only two strips of concrete are needed for the footprint of the arches. The arches are anchored to these using metallic anchor plates. The first arch is assembled on the ground, erected using a crane and bolted on to the anchors. The remaining arches are assembled in groups of three to six panels, which are placed in position using the previously erected arch as a guide.

Total assembly (and disassembly) time is less than two weeks for a standard-size hangar, although actual assembly time depends on the available workforce. Various options are available, enabling the customer to customize the hangar to their requirements. These include covers for the open sides of the hangar, electrical installation, a lightning protection system, and installation of photovoltaic panels. Dasyc can undertake the transportation, assembly and disassembly of the hangar at the customer’s designated site and will train the customer in all these aspects.

Dasyc is currently working on a redesign of CMTH to exploit the anisotropic properties of composite materials. The current use of quadaxial fabric leads to an isotropic composite structure exhibiting the same strength in the 0°, -45°, 90° and +45° directions. However, there is a non-uniform distribution of the stresses on the hangar structure, with more than 70% of the stresses concentrated in the 0° direction. The new laminate lay-up will employ unidirectional (UD) fabrics to strengthen this direction and eliminate unnecessary reinforcement from the other directions. Hexcel is working with Dasyc to trial a combination of UD, quadaxial and triaxial fabrics, enabling the structure’s mechanical performance to be optimized in the required directions. In June 2016 Dasyc received samples of Hexcel fabrics to start production of samples for verification of the optimized lay-up. Production is scheduled to resume in October.

Composite sandwich panels being tested.

Dasyc is also improving its mold construction in order to enhance resin flow during the VARTM process. In studies, the new fabric lay-up has also shown improved flow patterns. To further aid flow Dasyc and Hexcel will investigate the use of high-drape fabrics and a quadaxial fabric with integrated chopped strand mat (CSM) layer to enhance flow and surface finish. “We are very happy with our cooperation with Hexcel on this project,” says Nikos Efentakis President & Managing Director of Dasyc SA. “Hexcel offered us the quality we expect, together with competitive pricing and a professional collaborative framework.”

Coast-Line Intl
Smart Tools that act as Mandrels
Airtech
CompositesWorld
A manufacturing puzzle
NewStar Adhesives - Nautical Adhesives
Sysenqo high performance materials
industrial CNC routers
Keyland Polymer
Carbon Fiber 2024
KraussMaffei Metering Systems
CAMX 2024

Related Content

Hi-Temp Resins

Plant tour: Qarbon Aerospace, Milledgeville, Ga. and Red Oak, Texas

Veteran aerostructures Tier 1 transforms into 21st century leader in thermoplastic composites and multiple new markets.

Read More
Pressure Vessels

Novel dry tape for liquid molded composites

MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.

Read More
Plant Tours

Plant tour: Spirit AeroSystems, Belfast, Northern Ireland, U.K.

Purpose-built facility employs resin transfer infusion (RTI) and assembly technology to manufacture today’s composite A220 wings, and prepares for future new programs and production ramp-ups.

Read More

Composite rebar for future infrastructure

GFRP eliminates risk of corrosion and increases durability fourfold for reinforced concrete that meets future demands as traffic, urbanization and extreme weather increase.

Read More

Read Next

Wind/Energy

Composites end markets: Energy (2024)

Composites are used widely in oil/gas, wind and other renewable energy applications. Despite market challenges, growth potential and innovation for composites continue.

Read More
Thermoplastics

From the CW Archives: The tale of the thermoplastic cryotank

In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.

Read More
Trends

CW’s 2024 Top Shops survey offers new approach to benchmarking

Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.

Read More
Airtech International Inc.