Natural Fiber Composites Slowly Take Root
Lower-than-expected automotive growth reshapes outlook, encourages process development and exploration of new markets.
By Dale Brosius, Contributing Writer | February 2006
Driven by increasing environmental awareness, automakers in the 1990s made significant advancements in the development of natural fiber composites, with end-use primarily in automotive interiors. A number of vehicle models, first in Europe and then in North America, featured natural fiber-reinforced thermosets and thermoplastics in door panels, package trays, seat backs and trunk liners.
Source: Hempline Inc.
Harvesting of mature hemp plants, using a custom-designed swather.
Promoted as low-cost and low-weight alternatives to fiberglass, these agricultural products, including flax, jute, hemp and kenaf, signaled the start of a "green" industry with enormous potential. A market study in 2000 projected growth rates exceeding 50 percent per annum through 2005.
Actual growth, according to natural fiber suppliers, has been much lower, although still respectable at 10 to 15 percent per year. Factors that have retarded growth include limitations in processing technologies and molded part performance as well as the recent economic lull that depressed auto sales and prompted a renewed focus by OEMs on purchased part price, which temporarily overshadowed potential weight savings, and concerns for recyclability and environmental stewardship.
Between 2000 and 2006, notable changes in the natural fiber landscape have occurred, including a shakeout in suppliers and the rise of specific fibers with improved properties, albeit at the expense of other natural fibers. Suppliers' efforts have been refocused on the development of new processes and on exterior applications, as well as markets beyond automotive.
EXPERIENCE REFINES FIBER SELECTION AND PERFORMANCE
The universe of "bio-fibers" is fairly broad. Included are very short wood fibers from both deciduous and coniferous sources, used as fillers in extruded plastic lumber and molding compounds. Also represented are straw from corn, wheat and rice crops, and various natural grasses. From a commercial standpoint, the most viable structural fibers come from purpose-grown textile plants and some fruit trees.
Such fibers can generally be classified into three types, says Prof. Lawrence Drzal, director of the Composite Materials and Structures Center at Michigan State University (East Lansing, Mich.). "Bast" fibers, such as flax, hemp, jute and kenaf, are noted for being fairly stiff when used as a composite reinforcement. Leaf fibers, including sisal, henequen, pineapple and banana, are noted for improving composite toughness with somewhat lower structural contribution. Finally, seed or fruit fibers — cotton, kapok and coir (from coconut husks) — demonstrate elastomeric type toughness, but are not structural. (Drzal, Prof. Amar Mohanty and Dr. Manju Misra co-authored a major reference book, Natural Fibers, Biopolymers and Their Biocomposites, published in 2005 by CRC Press.)
Among the purpose-grown plants, bast fibers represent the vast majority of natural fibers with potential for composites usage. Bast plant stems are characterized by long fibers surrounding a core of pulp or short fibers and covered with a protective bark layer. Separation of the useful fibers from the bark and core starts with a process called "retting," in which the cut stalks are soaked in water or left in the field in a humid environment for up to several weeks to degrade the natural binders. This makes the fiber bundles easier to process by mechanical means, or by hand, as is the case in many developing countries. As of the mid-1990s, flax and jute were the principal fibers used in biocomposites, but have been joined by higher strength industrial hemp and kenaf, at least in automotive applications.
Flax fibers are grown in two common forms. In North America, almost all flax is of the oil seed variety, predominantly grown in central Canada, but also cultivated in North Dakota and Minnesota. Its primary use is for linseed oil and food products. Attempts to commercialize the stalk fibers for composites were only marginally successful and have been largely abandoned. However, textile flax, a much taller plant and the source of commercial linen fiber used in clothing, now is the source for almost all flax-based natural fiber composites. It is grown widely in Russia, China and, to a lesser extent, Northern Ireland, Belgium and France.
The jute plant is native to southeast Asia, with India and Bangladesh responsible for more than 90 percent of worldwide production. Popular for the production of carpet backing, tote bags, sack cloth (burlap) and rope, jute is cut, retted, separated and cleaned in largely manual processes. Although jute has been partially replaced by other bast fibers in some of its earliest composite applications, it continues to be popular in interior automotive components.
The use of kenaf fiber as a reinforcement has grown substantially in the past decade. Resembling the hibiscus plant and related to cotton and okra, kenaf is grown widely in India and China, which together account for more than 75 percent of worldwide kenaf production. In the U.S., south Texas and eastern North Carolina supply relatively small amounts of kenaf.
An attractive feature of kenaf is that up to 40 percent of the stalk yields usable fiber, roughly twice that of jute, hemp and flax, which makes the fiber quite economical. Also, the plant can grow from seed to heights of 3.6m to 4.3m (12 ft to 14 ft) in five to six months. Asian kenaf is predominantly grown for the fiber, and soaking of the stalks during the retting process, combined with manual removal of the fibers, is believed to result in superior reinforcement quality. Comparatively, U.S. kenaf producers, including Kenaf Industries of South Texas (Raymondville, Texas) and Greene Natural Fibers (Snow Hill, N.C.), use field retting and mechanical separation. The kenaf core materials, which can be used as absorbents and animal bedding, have more ready markets. While both companies supply some fiber to the composites market, they also are pursuing other applications, such as extruded plastic fencing and decking, and furniture padding.
Source: Hempline Inc.
A bale of short staple hemp fiber, following retting, separation and cleaning.
